Recommended ST235/85R16 Wheel and Tire Combo for a Spare  

Thanks for reaching out! It looks like we did carry that exact wheel at one point on our site but it has since been removed. I reached out to our team about it and they said our rep told us it was NLA'd (no longer available) back in May of…

You are 100% correct! The closest match and best option to upgrade your 7.50-16 LT bias ply tires, is going to be an ST235/85-16 radial tire, like the Kenda Karrier #AM32743B you were checking out. This tire is pre-mounted on a 16 inch diameter by…

Do you by any chance mean 235/80-16 and 235/85-16? Because there isn't a 275 trailer tire size that I have seen. If so then the widths are the same between the two 235 sizes. The difference is overall diameter. The 235/80-16 is 30.9 inches…

Yes, the Dexter Electric Trailer Brakes #23-180-181 will indeed be compatible with the Easy Grease Trailer Hub and Drum Assembly #AKHD-655-6-EZ-K. The brake assemblies use the standard 12" x 2" brake shoes, and the hubs are designed to work…

I checked with Dexter, manufacturer of many trailer parts, and according to them there should be at least 1 inch of space between the tires when under load. So once your trailer is loaded and ready to tow, if you have more than 1 inch of space…

The spring hanger placement is going to be determined by your axle spacing. For example, if your axles are spaced 33 inches apart, as shown in the attached diagram, a 7K axle slipper spring, like #e74SR, requires a distance of 28-1/2 inches between…

I have a solution for you but the Provider ST235/80R16 Radial Trailer Tire w/ 16" Vesper Silver Mod Wheel item #TA86FR does not come in black. The tire and an identical wheel but in black are available separately. I have listed them below:…

The spacing is going to depend on the size of your tires, so let's start with that. For a 16 inch wheel/tire combo with an 8 on 6-1/2" bolt pattern the best option is a ST235/80R16 size tire with a load range of G to handle the capacity of…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…