Looking For Grease Seal With 2.32" OD And 1.5" ID
Updated 02/03/2026 | Published 06/25/2024
Products Featured in This Question
Question:
hello I am having trouble finding a grease seal for an old snowmobile trailer. I am hoping you can help. I believe the trailer is rated 2000 lb.s it has an 1.25 inch straight spindle shaft and uses two lm67048 bearings per spindle. the O.D. on the seal is 2.32 inch measured with a digital caliper. The seal has a metal body that measures .43 thick. the seal is gone but rides on a shaft that measures 1.48 inch but might be worn and was 1.5 inch. any help would be appreciated.
asked by: Paul
Helpful Expert Reply:
Hello Paul. We do have one grease seal that matches the specs you provided. Take a look at the Timken Grease Seal # TMK89ZR. This one has a 2.332" OD and a 1.5" ID so it appears this is the seal you are looking for.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L44649 / L44649
- Marine Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: trfa71063
- Search Results: 17~145
- Search Results: convert~a~ball
- Search Results: anderson
- Search Results: 35k axle
- Search Results: 67048
- Shop: Ark Xtreme Off-Road Swivel Trailer Jack w Dual Wheel - Sidewind - 10" Lift - 1,650 lbs - Silver
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,200 lbs
- Shop: Easy Grease Trailer Idler Hub for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 2K Axles - 7" Diameter - 5 on 4-1/2 - L44649 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Blaylock EZ Lock Gooseneck Coupler Lock - Bulldog/Stallion/Superior/T.E.M. Gooseneck Couplers
- Shop: Gooseneck Hitch
- Search Results: akihub~545~2~2k
- Shop: Trailer Hitch
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Shop: Brake Controller
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: B&W Companion OEM 5th Wheel Hitch Manufacturer Breakdown
- Article: How to Measure Your Trailer Wheel Bolt Pattern
on Trailer Hubs and Drums
Jesse M.
2/3/2026
Hey Paul, did the Timken grease seal end up fitting your snowmobile trailer spindle the way you needed? Knowing how it worked out could help others trying to match seals for older trailers.