Troubleshooting Auto Level Failure On Lippert Ground Control System

Updated 06/24/2024 | Published 06/15/2024

Question:

2006 Tiffin Allegro Bay Leveleg failure, what is the replacement?

asked by: Scott

Expert Reply:

Hello Scott, thanks for reaching out. On the Lippert Ground Control system # LC675817, the auto level failure indicates either a problem at the left front jack, a hall signal issue (open ground/short, or other malfunction) or an unexpected high amperage current stall (meaning the battery stopped providing power for some reason). This error can also be a result of the trailer being on uneven ground or the Zero Point simply needs to be reset. If you find that the trailer is on unlevel ground simply move it to a different location and this should hopefully resolve the issue. Otherwise you will just need to reset the Zero Point on the system. The instruction below will show you how to do a reset.

expert reply by: Jesse M

Zero Point Calibration
(click to enlarge)

Scott

6/21/2024

As the question implied, these are Leveleggs by Atwood, not Lippert. Looking at replacing the complete set now, can you quote parts only? 2005 Tiffin Alegro Bay. Thanks

Jesse M.

6/24/2024

@Scott Gotcha. The Atwood Leveleg system has been discontinued. Our best option for a full replacement is the Lippert Ground Control 3.0 Leveling System. I recommend the 4-Point Set # LC358590 if there is less than 20' between the front and rear leveling jacks, or the # LC675817 if there is 20' or more between the front and rear leveling jacks. You can see our current pricing below.