Info Needed to Pick Out Replacement Grease Cap for Trailer Hub
Updated 06/27/2024 | Published 06/12/2024
Question:
Trying to find a grease cap for my 1963 Aloha Trailer. I can send you a picture with my calipers showing the exact measurement to fit the hub.
asked by: Michael C
0
Expert Reply:
You'll have to email it to me since you won't be able to upload a picture on this page as convenient as that would be. Or you can just comment back the inner hub bore of the hub where the cap fits as that would be enough info as well.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Fulton Grease Cap - 1.943" Outer Diameter - 1-3/8" Tall - Drive In
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 1.94 Inch O.D.
- 1.94 Inch
- 2000 lbs Axle
- Fulton
more information >
Continue Researching
- Shop: Fulton Grease Cap - 1.943" Outer Diameter - 1-3/8" Tall - Drive In
- Q&A: Grease Cap Recommendation for Hub with 1-15/16 inch Hub Bore
- Q&A: Do You have Grease Caps for a 1.935 Bore Diameter Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Replacement Bearing Kit for TDE 46845 Hub
- Q&A: Axle Upgrade For Ironton 5 X 8 Utility Trailer
- Article: How to Measure a Trailer Axle
- Q&A: Replacement Caliper Solution for Tie Down Engineering 46304
- Q&A: Grease Cap Recommendation for Trailer Hub with 1.938 inch Bore
- Q&A: How to Measure a Trailer Hub or Dust Cap to Find the Right Replacement Dust Cap
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Maintenance Schedule
Michael C.
6/27/2024
Have you looked at the photo I sent you showing the exact dimensions of the grease hub cap.