Will The Rhino-Rack Pioneer Platform Roof Tray # RR22TB Fit On 62" Wide Crossbars

Question

Question:

Will this fit my tear trailer with welded roof rack? Roof rack is 46 inches long and 62 inches wide. Will probably need to use Rhino rack bracket kits for mounting.

asked by: Jeremie

0

Expert Reply:

Hey Jeremie,

Does your roof rack look like the rack I have pictured below that has a lip sticking up past the crossbars? If so, you'd likely run into issues with the Rhino-Rack Pioneer Platform Roof Tray # RR22TB fighting to fit with it also being 62" wide.

expert reply by: Kevin C

0

Welded Crossbar
(click to enlarge)

Answer 1

Obtaining the Rhino-Rack Roof Rack System #Y02-500B with longer crossbars is just a matter of piecing out the system into its individual components. You will just need the Rhino-Rack RTC-Style Tracks #RTC16 that install on top of the bed rails, the…

view full answer...

Answer 2

Rhino Rack has 31 inch long RTC tracks with the part #RTC8JW which you could use with the RTC Feet part #RRRLT600, and the 65 inch bars #RRVA165B and you'd have setup that would give you the two 30 inch tracks you are looking for.

view full answer...

Answer 3

The closest option we have is the Rhino Rack part #Y02-500B which gives you a similar aero shaped crossbar setup that has 65 inch long crossbars. The bars are through-bar style which means they stick out past the feet of the rack.

view full answer...

Answer 4

The Rhino-Rack Roof Rack System part #Y02-500B is a fit for your 2014 Ford F-150 with 6-1/2" ft bed. They 65" long but your bed is 78 inches long so you will not have any issues installing these on your camper shell. I have attached a photo…

view full answer...

Answer 5

I have a solution for you, but the Rhino Rack Pioneer Platform #RR25TB is designed to mount directly to either a Rhino Rack fit kit or Rhino Rack HD bars so you'll need a Pioneer platform that mounts to crossbars. There are 2 different sizes of…

view full answer...

Answer 6

I was able to find that your 2000 Viking 2485st pop-up camper is 23 feet 10 inches long by 7 foot 1 inch wide. We have a couple options for your trailer. You can use the SportRack Pop-Up Camper Roof Rack - Square Crossbars - Steel #SR1020 or the…

view full answer...

Answer 7

The tracks of the Rhino Rack Roof Rack System part #Y02-500B are 1-1/2 inches wide by 1/2 inches tall. The length of the tracks is 63 inches. The feet height for this is 3 inches which is the distance from the top of the tracks to the bottom of the…

view full answer...

Answer 8

We have exactly what you need to add a soft roll-up tonneau cover and sliding tracks to the 5-1/2 foot bed of your 2018 Ford F-150. For this I recommend a combination of the Access Vanish Tonneau Cover #A91369 and the Rhino-Rack Roof Rack System…

view full answer...

Answer 9

If by cross rack you are talking about a roof rack with crossbars then the answer is no, the Rhino-Rack RTC-Style Roof Rack Tracks #RRRTC8JWMY11 will not work with a Thule cross rack. The Rhino-Rack RTC-Style Roof Rack Tracks #RRRTC8JWMY11 is…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Will The Rhino-Rack Pioneer Platform Roof Tray # RR22TB Fit On 62" Wide Crossbars

Continue Researching