Kenda Replacement Tire Recommendation for Old Farm Equipment 16.5-8 Size Tire
Updated 05/31/2024 | Published 05/27/2024
Products Featured in This Question
Question:
I have an old farm implement and am looking for 16 x 5 - 8 size without tearing the wheels off to measure the rim size will the 4.8-8 fit the rim?
asked by: Jeffrey C
Expert Reply:
Hey Jeffrey, thanks for reaching out!
The Kenda K371 Bias Trailer Tire - 4.80/4.00-8 - Load Range C # AM10004 is for a 3-3/4" wide wheel, but your 16.5-8 tire is going to measure larger at about 6.6". Because of this, a better match for your current setup is the Loadstar K399 Bias Trailer Tire - 165/65-8 - Load Range C # AM1HP22 which is similar in construction and specs, but has the larger width you're needing.
Product Page this Question was Asked From
Kenda K371 Bias Trailer Tire - 4.80/4.00-8 - Load Range C
- Trailer Tires and Wheels
- Tire Only
- Bias Ply Tire
- Load Range C
- 4.80/4.00-8
- 8 Inch
- Kenda
more information >
Continue Researching
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Q&A: Recommened Trailer Tires/Wheels to Replace a 4.8-8 Tire W/ 5 Lugs
- Q&A: Compatible 4.80 X 8 Trailer Tire That Can Handle Highway Speeds
- Q&A: Length of Parking Brake Kit Cable
- Q&A: Is it a Good Idea to Upgrade from 8 inch Trailer Wheel and Tire to 12 inch Wheel and Tire
- Q&A: Best Weight Distribution System For A 2014 V-Cross Vibe Limited Series M-6504
- Q&A: Does Kenda K371 Bias Trailer Tire AM10004 Have Speed Rating
- Article: Trailer Lighting Requirements
- Article: Trailer Tire Sizing
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: Glacier Chains
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)