Replacement Dual Water Inlet For A 2005 Exiss 414 Horse Trailer  

Question:

Expert Reply:

Hey Lagina,

We offer a few different dual water inlets so you'll want to measure the cutout hole and overall dimensions to make sure that the replacement will be a fit and not interfere with any other trim or accessory that could be mounted on the wall of the trailer next to it.

The Valterra Lockable Dual RV Water Inlets # A01-2000VP (white) and # A01-2000BKVP (black) are a pretty standard size for most trailers so I'd say these are likely going to be what you need. They measure 7-5/8" wide x 6-1/2" tall overall and require a 5-7/8" wide x 4-3/4" tall cutout hole. They also come with a locking door which is pretty standard on horse trailers. If you find that yours differs in size and these two options won't fit then let me know and I'd be happy to look for one that would.

For the installation you'll want to use some butyl tape # AL28FJ on the back side of the mounting flange and run a bead of non-sag sealant # 344270341437-1 around the outer edge of the flange for a watertight seal.

expert reply by: Kevin C

0