Is There a Better License Plate Bracket That Will Work With Low Profile LED RV Tail Light RVSTL11?

Question

Question:

Ive had the license plate mount on two of these lighting assemblies fail so far and I had to replace the light and my license plate. Is there a license plate bracket that I could use with this light that would be more durable than the integrated plastic one thats part of this lighting asembly?

asked by: Marcus T

0

Expert Reply:

While there isn't a more durable license plate bracket specifically designed to fit the Low Profile LED Combination RV Tail Light w/ Bracket # RVSTL11, this won't prevent you from putting a bracket like the # 428-09 behind the light. While the holes in the bracket are not going to match your light you can drill new holes through the bracket to hold it in place with the light.

Another option would be to just mount the license plate separately with the License Plate Bracket with Light # 753-2026. You could mount the plate in a different place and run the wiring to the running light portion of your tail light.

expert reply by: Bud M

0

Answer 1

If there's ever an issue with the signal on a Furrion camera system is almost always comes down to lack of power. Plugging in your #FOS43TASF to the monitor cable is giving you a direct 12 volts to the camera whereas when installed on the trailer…

view full answer...

Answer 2

Hi Richard; the Furrion Vision S+ Wireless RV Backup System #FR57AD does not come with a mount for your 2024 F-350 mirror. You can use the suction cup and mount it near your rear view mirror but there is no specific mount for it. The system actually…

view full answer...

Answer 3

For your Optronics light part as2t216 we have found that the correct replacement lens is the part #AST60B.

view full answer...

Answer 4

Hey John, thanks for the kind words! The Dometic 320 Full-Timer RV Toilet #DOM87FR that you referenced has a 2 year limited lifetime warranty. We would take care of the warranty if needed as long as your bought it from us. Have you had issues with…

view full answer...

Answer 5

I would certainly recommend the 1/2-inch wire loom #459075-1. It will hold two jacketed 2 wire 10-gauge wire and three jacketed 2 wire 12-gauge wire. See pictures to the right. In addition, I was able to fit comfortably eleven individual 16-gauge…

view full answer...

Answer 6

Hey Roger, The oxidation of the plastic causes this and unfortunately isn't something that you can really get a rating on from the manufacturer. It's the same as the plastic seats at an outdoor stadium. Keeping the trailer clean and out of…

view full answer...

Answer 7

Thank you for the photo! Looks like you're needing the Low Profile LED Combination RV Tail Light #RVSTL10 for your 2018 Forest River Rockwood Roo. Attached is a review video for you to check out.

view full answer...

Answer 8

We have just the replacement microwave for you! The Furrion Standard RV Microwave #FMSN09BL has 6 auto-cook settings and 10 power levels to heat your quickly and efficiently. The microwave has an LED display that shows the timer, clock, and other…

view full answer...

Answer 9

Since the Torflex number 9 axle is a 2,000 lb capacity axle and I was able to determine that your Little Guy Meerkat Trailer has wheels that have a 5 on 4-1/2 inch bolt pattern the correct hub/drums you'd need to add brakes would be the Dexter…

view full answer...

Answer 10

Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.

view full answer...

Is There a Better License Plate Bracket That Will Work With Low Profile LED RV Tail Light RVSTL11?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching