Wiring In A Tekonsha Prodigy RF And Mighty Cord 4-To-7 Pin Adapter
Updated 04/23/2024 | Published 04/22/2024 >
Products Featured in This Question
Question:
My question is in regards to the Mighty Cord 4-to-7 pin adapter part A10-7084VP I have a Prodigy RF remote controlled Electronic Brake Controller installed on my trailer. The Prodigy has a 7-pin connector. My tow vehicle has a 4-pin flat for brake/turn lights. Since the Prodigy enables braking either by a Bluetooth connection to its remote handheld unit OR by means of an internal accelerometer, no control wire from a dash mounted brake controller is needed. If I were to connect the 7-pin from the Prodigy to the 4-pin flat of the tow vehicle with the Mighty Cord 4-to-7 pin adapter will power circuit from the 4-pin flat connector provide power to the brake circuit of the Prodigy.
asked by: Randy M
Expert Reply:
Hey Randy.
You can install the Mighty Cord Trailer Connector Adapter # A10-7084VP and cap off the blue brake controller output wire with some electrical tape since the Prodigy RF will not be connecting to it. This system detects deceleration and activates the brakes accordingly and the remote gives you the ability to read errors and manually activate the brakes.
The yellow wire on the # A10-7084VP can also be capped off with some electrical tape unless you need a reverse light signal. The white wire will need to be grounded to the vehicle frame and the 4-pole wire connector can be plugged into your vehicle's 4-pole connector if you have one. If not, you can use part # C59496 (hybrid) or # 118467 (non-hybrid). The black wire will need to be ran up to the battery with a 40 amp circuit breaker # 9510 and 10AWG wire # 10-1-1 for auxiliary power for the Prodigy RF.
Product Page this Question was Asked From
Mighty Cord Trailer Connector Adapter - 4-Way Flat to 7-Way RV Style - 12" Long
- Custom Fit Vehicle Wiring
- Wiring Adapters
- Universal Fit
- 4 Flat to 7 Blade
- Plug and Lead
- Mighty Cord
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Finding a Trailer Hitch for a 2025 Coachmen Apex Nano 208BHS
- Q&A: Hitch, Wiring, and Brake Controller for 2000 Toyota Tundra
- Q&A: Which Bearing Buddy Fits Landscape Trailer With 3,500 lb Axle
- Q&A: Will Replacement Main Board Assembly Fit WFCO 8955PEC
- Q&A: How to Install 7-Way Trailer Connector on 2017 Jeep Wrangler JK Without Tow Package
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Simplest 4-Way to 7-Way Adapter
- Q&A: Recommended Trailer Valet Trailer Dolly for Moving Loaded Trailer Up and Down Driveway Steep Grade
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Winterize & De-Winterize Your RV (Simple Guide)
- Article: Troubleshooting Brake Controller Installations



