Mount: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector on a 2024 Subaru Crosstrek Video

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Sandy you are absolutely correct about the bumper/design differences with the Crosstrek Wilderness edition. As of right now (February 2024) none of our manufacturers (Curt, Draw-Tite, Stealth Hitch) make a hitch specifically for the Wilderness…

The main difference between the Curt Trailer Hitch Receiver part #C13382 and Draw-Tite Max-Frame Trailer Hitch Receiver part #76209 for a 2020 Subaru Crosstrek is that the Curt hitch has a hidden crosstube see photo one and the Draw-Tite hitch has a…

Yes we do! I can definitely help get you set up. For your 2024 Crosstrek I recommend the etrailer class 3 hitch #e98912. This is rated to tow 3,500 lbs and has a 525 lb tongue weight capacity. For the 2024 Crosstrek models, Subaru added a…

Yes, it does! The Draw-Tite Hitch item #76209 has been confirmed to fit all models of the 2024 Subaru Crosstrek including the Wilderness. This hitch is custom fit and bolts to your Subaru with included hardware. If your Subaru is not a hybrid, I…

Yes, our 7-Way Kit #ETBC7 will connect into your factory 4-way on your 2024 Subaru Crosstrek. This means you will not have to splice into the tail lights. The kit does include universal wiring for both a charge line and Brake Controller #RED52VR…

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

The only trailer component that determines the speed rating of the trailer is the tires. All you have to do is simply replace your current tires with one that is rated for highway use, like the Kenda Loadstar #AM3S120 that you referenced, and you are…

The etrailer Hitch #e98912 comes with four 1/2-13 x 1 1/2 carriage bolts.

I've attached some photos so you can see how the #e98912 is going to look like after you install it on your 2020 Subaru Crosstrek Limited. These photos were submitted by another Crosstrek Limited owner who confirms it's a perfect fit and as…

You've got good instincts. I recommend going with a ball mount that has a 2 inch rise for the exact reason you mentioned, the truck will settle a bit with the tongue weight and any cargo weight. The ball mount we offer with a 2 inch rise is the…

To install a 7-Way harness on your 2024 Subaru Crosstrek you will need two separate wiring harnesses because they don't make just one that'll do the job. The first harness you'll need is the Curt T-Connector Vehicle Wiring Harness item…