Replacement Passenger-Side Side Marker Camera For A Furrion Vision S Camera System

Question

Question:

I have a passenger side camera that needs replacing on my 2023 Grand Design RV 5th wheel. The camera is a model FCR48TAR Furrion. Please tell me what I need for replacement. Thank you.

asked by: David

0

Expert Reply:

Hey David,

If you're only needing to replace the passenger side side maker camera for your Furrion Vision S camera system then you'll need part # FR28NR.

expert reply by: Kevin C

0

Answer 1

Hey Edward! The reason you're seeing the lights need to be on is because most people tie the Furrion Vision S+ #FR57AD into their running light circuit. Are you wanting the camera on the rear to have constant power? You will have to tie it into…

view full answer...

Answer 2

The 4.3" Furrion Vision S Camera System monitor #FR77FR is going to pull 500mA at 12v when the screen back light is on and 300mA at 12v when the light is off.

view full answer...

Answer 3

Hey Alfredo! Great question. The Furrion Vision S+ Wireless RV Observation System #FR57AD, #FR74AD, and #FR64AD are all capable of recording. The 7" monitor has a micro-SD card slot (must be at least Class 10) and supports cards up to 128GB.…

view full answer...

Answer 4

A couple of things to check when trying to pair monitor to the camera for the Furrion Vision S #FOS43TASF. First make sure that the monitor is close enough to the camera. Next make sure that the camera is receiving power (indicated by LED light on…

view full answer...

Answer 5

Based on what you're describing the side cameras of your Furrion Vision S Wireless RV Backup Camera System w/ 3 Cameras #FCE48TASL-05 will do this for one of two reasons. You could possibly have the turn signal wire of the camera spliced into the…

view full answer...

Answer 6

Hey Kurt, while the Trailer Valet jack pat #TV95FR does have a scale built into it the scale does not move to the point that you would physically be able to feel it moving if that's what you are asking. If instead you are asking if the numbers on…

view full answer...

Answer 7

Hello Glen, I am glad that you wrote in. Since you have a 18,000 pound rig on a 2014 F-53 Chassis, you will want the Safe-T-Plus Steering Stabilizer with Mounting Hardware Kit - Custom Fit #ST88MR. The red ones are designed for a smaller camper than…

view full answer...

Answer 8

The trigger wire on both the Drivers #FR85MR and Passenger #FR28NR side cameras is not required if your camper does not have a turn signal function on the front side marker lights. Without having the trigger wire available this simply means you will…

view full answer...

Answer 9

To add two side cameras to your Furrion Vision S Wireless RV Backup Camera System with 5" Screen #FOS05TASF, you can use the Marker Light RV Side Cameras #FCE48TASL. I can understand your concern with the trailer having all LED lights, but it…

view full answer...

Answer 10

Hey Robert, I would check to see if something happened to the antenna on the camera if this is a new problem. It's possible it's not pointing up anymore and fixing that will get you back the reception you once had. Let me know if that helps…

view full answer...

Answer 11

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Replacement Passenger-Side Side Marker Camera For A Furrion Vision S Camera System

Product Page this Question was Asked From

Continue Researching