How to Set Memory on Powerbuilt Digital Torque Adapter
Updated 03/18/2024 | Published 03/15/2024
Question:
Hi What are the steps to set memory 1 Turn on the unit 2 Set the torque to 92 lb 3 Next what
asked by: Sam
Expert Reply:
The memory isn't something you set through the buttons on the # ALL940962. When operating in peak mode it stores the torque memory from the maximum torque applied. It automatically stores up to 50 peak torque values. To recall stored torque values from the memory, press "Mem" button for at least 1 second, then release. The display will show the memory number as "P01" then "Torque value". Press "Mem" button at least 1 second one more time. The display will show the memory number as "P02" then "Torque value". "P01" is the latest reading. "P50"will be the oldest reading.
Product Page this Question was Asked From
Powerbuilt Digital Torque Adapter - 1/2" Drive
- Automotive Tools
- Torque Wrench
- Wrenches
- 150 ft/lbs
- 1/2 Inch Drive
- Powerbuilt
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Q&A: 1/2" Wheel Stud Lug Nut Torque Setting And Tightening Pattern
- Q&A: Load Range D Trailer Wheel and Tire 5.30-12
- Q&A: What is the Load Carrying Capacity of a Load Range D 5.30-12 Trailer Tire
- Q&A: Upgrading the 5.3 X 12 Wheels and Tires on a Harbor Freight Haul-Master Super Duty Folding Trailer
- Q&A: Do Trailer Wheel and Tires Need to be Balanced
- Q&A: What Does the 5 and the J Indicate on a 15x5J Trailer Wheel and ST205/75D15
- Article: Anti-Rattle Devices
- Article: How to Measure for Trailer Hitch Drop
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: Determining Trailer Tongue Weight
Sam
3/18/2024
Hi Robin, The instructions in the box were clear. So, if I understand you correctly. If I torque my camper to 92-foot lbs., and the next time I press P01, it should be registered as 92. Thank you,