What Color Wire Typically Carries the Running Light Circuit

Updated 03/11/2024 | Published 03/05/2024

Products Featured in This Question

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Hybrid Adapter Cord

(3257)

$260.70

LCD Digital Circuit Tester

(28)

$27.94

Question:

I have a 2022 Kia Soul and there are 2 wires each side Grn/Blk left light and Brown/Blk Right Light which of these should I use for my running light connection?

asked by: Bill

Expert Reply:

Hey Bill, based on traditional trailer wiring colors the brown/black wire would be the correct circuit to use for running lights but I would recommend using a circuit tester like part # PTW2992 to test this circuit for voltage when the running lights are on.

expert reply by: Jameson C

Bill

3/5/2024

James, Thank You for your reply but you missed the actual question. There are 2 Green/Blk wires in the left light assembly and 2 Brown/Blk wires in the Right light assembly. Each wire goes to a different pin. Which one on each side should I use? With an ohm meter they appear to be connected together in the light assembly perhaps they doubled up to supply the current for the incandescent bulb?

Jameson C.

3/11/2024

@Bill That is an interesting situation. I would put a circuit tester like part # PTW2993 on both wires to determine what circuits each wire carries and go from there. Manufacturers are very efficient with wiring nowadays to cut costs as much as possible I would be shocked if the same circuit was ran to both wires.