What Is An E5 Error Code On a Atwood AC
Updated 08/26/2024 | Published 03/03/2024
Question:
ATWOOD AC-1361 MAKES A THUMPING SOUND WHEN SHUTTING OFF. FAN KEEPS RUNNING. ERROR CODE E5 FLASHES ON THE THERMOSTAT.
asked by: Jeff
0
Expert Reply:
The E5 error code you're getting on your Atwood AC is a compressor overload. To clear this code, you'll need to remove power to the compressor for a couple minutes and then supply power back to again.
expert reply by:
Bryce D
0
Product Page this Question was Asked From
Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 5,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 5200 lbs
- Spindles Only
- 71-1/2 Inch Spring Center
- 86-1/2 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Q&A: Replacement Axle Beam for 2020 Grand Design Reflection 315RLTS
- Q&A: Replacement For 86-1/2 Inch Long 5,200 lb Axle
- Q&A: What is Recommended Clearance between Trailer Axle and Frame
- Q&A: What is the Minimum Space Between Tires on a Tandem Axle Trailer
- Q&A: Best Shock Kit to Use with Lippert Center Point Suspension System
- Q&A: Recommendation for Increasing Axle to Trailer Frame Clearance
- Q&A: What Are The Bolts Pointing Towards Hub On The etrailer Trailer Axle Beam # e33GR
- Article: Trailer Wiring Diagrams
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Measure a Trailer Axle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
John G.
8/26/2024
Is just cutting the breaker off the same, or is it getting 12v from RV. And how to disconnect thanks in advance.