Will The PD4635V Work As A Replacement For The 6332 Converter

Question

Question:

I was sent a pd4600 as a replacement for my 6332 will this work?

asked by: Jason

0

Expert Reply:

Yes, the Replacement Converter Section # PD4635V will be a direct replacement upgrade for your Magnetek model 6332 that you have.

expert reply by: Jesse M

0

Steven

8/14/2024

I'm currently in the process of changing from a 6332 to the PD4635V. I have a red wire that goes from the old converter box to the red positive on the rear of the distribution board. I don't see any reference to it in the removal instructions. What do I do in the new converter? Is this connection eliminated in the new setup?

Answer 1

You can upgrade your Magnetek 6332 using the Replacement Section for AC/DC Power Distribution Panel - 35 Amp #PD4635V.

view full answer...

Answer 2

Absolutely, I can help with that, and I’m glad you checked before ordering because with older units like yours it’s important to get the right fit the first time. Yes, you can replace your Series 6300 model 6332 converter and keep your existing…

view full answer...

Answer 3

Hello Jason, thanks for reaching out. The low charge rate you are seeing is pretty typical with the WFCO WF-8935-AD when used with lithium batteries. The Progressive Dynamics replacement section #PD4635V is a much better match for a lithium setup. It…

view full answer...

Answer 4

Hi! If your Magnetek 6300 Q Series converter, model 6332, has stopped working and you just need to replace the converter section, the part you want is the Replacement Section for AC/DC Power Distribution Panel Part #PD4635V. This is a direct…

view full answer...

Answer 5

Hey Amy, if you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V that you referenced will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have…

view full answer...

Answer 6

Hello Nate, sure can! The Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade replacement for the Magnetek Converter Series 6300 Model 6332 that you have now. We get asked about replacing those…

view full answer...

Answer 7

If you are just looking for a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade for the Magnetek Converter Series 6300 Model 6332 that you have now.

view full answer...

Answer 8

Hey Carl, yes the Replacement Section for AC/DC Power Distribution Panel #PD4635V that you referenced was designed to replace the lower section of your Magnetek Power Plus series 6300A Model 6332. I am not sure where you saw 32 amps as the output…

view full answer...

Answer 9

Hello Jonathan, thanks for reaching out. We do offer a lithium compatible replacement for your Magnetek 6332. For that, I recommend the following: - Replacement Section for AC/DC Power Distribution Panel - 35 Amp #PD4635V This would be fine to use…

view full answer...

Answer 10

Hey Ron, the Replacement Converter for your Magnetek Converter Series 6300 Model 6332 is going to be the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 35 Amp item #PD4635V. It being rated a couple amps higher will not be an…

view full answer...

Answer 11

Thanks for the pictures! To replace the converter in the Magnetek Series 6300A Model 6336 you will want the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 35 Amp item #PD4635V.

view full answer...

Answer 12

Hey Kyle! The correct replacement for your Magnetek model 6336 is the Replacement Section for AC/DC Power Distribution Panel - 35 Amp #PD4635V. As long as everything else is working properly replacing the converter section with this is the best…

view full answer...

Will The PD4635V Work As A Replacement For The 6332 Converter

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching