Location of Brake Controller Installation Connector on 1995 Dodge Ram

Updated 12/01/2009 | Published 11/29/2009

Products Featured in This Question

Tekonsha Primus IQ Trailer Brake Controller - Up to 3 Axles - Proportional

(2158)

$90.04

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(274)

$36.84

Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Dodge

(962)

$19.19

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3397)

$121.27

Question:

wher to find tow package hook up under dash on a 1995 dodge ram pickup with 7-way connector. Want to install Tekonsha Primus brake controller.

asked by: roger

Expert Reply:

I am assuming that you are speaking of the installation connector for a brake controller. It is located on top of the white box on the firewall behind the emergency brake pedal.
To install your brake controller, you will also need a Wiring Adapter, part # 3020-P.

If your truck isn't equipped with the factory 7-way trailer connector, the plug might not be present. If the connector is not there, you'll need to hardwire the controller using our brake controller installation kit, part # ETBC7. If you don't have a functional 4-pole flat trailer connector, you'll need to install one using part # 118329.

I've linked you to our FAQ article showing how to install a controller on a Dodge Ram pickup. I've also linked you to an install video.

expert reply by: Mike L