Will Lippert Patio Upgrade Fit 2013 Roadwarrior Toy Hauler

Question

Question:

Will your rear ramp LC27fr work on a 2013 roadwarrior? Do you ship to Canada?

asked by: Kevin M

0

Expert Reply:

As long as your 2013 Roadwarrior has a 94 inch rear door yes the Lippert Patio Upgrade kit part # LC27FR will fit and work great. I don't see why your RV wouldn't have that but it wouldn't hurt to check to be sure. Yes we can ship to Canada.

expert reply by: Jameson C

0

Answer 1

Hi Alan! The Equa-Flex Cushioned Equalizers LC279689 was for 35" axle spacing and the MORryde Shock Absorbing Suspension Equalizers #MR59ZR is for 33" axle spacing, so it would not be the one I recommend. The MORryde Rubber Equalizers…

view full answer...

Answer 2

Excellent question. I had to think about this one for a bit and consult another person familiar with trailer assembly. Normally the band is placed forward of the axle on the trailer but it really does not matter which way the band is oriented.…

view full answer...

Answer 3

Hey Ron, good to hear from you! How long are your current U-Bolts? The U-Bolt Kit #APUBR-8 could potentially work as it has 7" long U-Bolts, but it really boils down to what you currently have. For something longer we have the MORryde U-Bolt Kit…

view full answer...

Answer 4

In order to choose the correct MORryde Shackle Upgrade Kit you'll need to know the length of your shackle straps. If you have 2-1/4" long shackle straps then you can use part #MR86ZR or if you have 3-1/8" long shackle straps you can use…

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 12

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Will Lippert Patio Upgrade Fit 2013 Roadwarrior Toy Hauler

Product Page this Question was Asked From

Continue Researching