Oil Bath Conversion Kit for Ranger Trail Boat Trailer
Published 02/01/2024
Products Featured in This Question
Question:
I would like to convert my Ranger boat trailer hubs to an oil bath system. It came out of the factory with their grease system, which I am not a fan of. It is a Ranger Trail trailer, manufactured by White River marine. I am not sure if you already have details on these trailers or not. Years ago, they used to offer their Cool Hubinch oil system, but they have gone the cheap route now, and only provide a grease system. Thanks
asked by: Marty B
Expert Reply:
Your Ranger Trail boat trailer is not something we have information on so you will need to identify your axle/hubs to find the right parts. Once you have identified the axle you may be able to use one of the following:
-Kodiak XL ProLube Kit for 3500-lb Axles # XLPROLUBE1980KIT
-Kodiak XL ProLube Kit for for 5,200-lb to 6,000-lb Axles # XLPROLUBE2440KIT
These kits are designed for standard axles. The 3,500 lb kit fits a 1.98" hub bore and the seals fit a 1.72" spindle. The 5,200-6,000 lb kit fits a 2.44" hub bore and 2.25" spindle. If neither of these matches what you currently have you will need to piece the parts together. I attached two links below with all of our available oil seals and oil caps for your reference.
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- 25580 / 15123
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Replacement Trailer Hub Bearing - L68149
- Shop: Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: DeeMaxx 10" Hub/Rotor Assembly - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Search Results: dexter tang washer
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Hub Assembly Recommendation for Ranger Trail Boat Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Review of Dexter Trailer Axles - Trailer Spindles - Trailer Suspension Parts - DX82CR
- Video: All You Need to Know About the Grease Seal
- Video: Kodiak XL ProLube Kit for 3500-lb Axles Feature Review
- Video: Breaking Down the Kodiak XL ProLube Oil Bath Hub Body and Cap
- Video: Breaking Down the Kodiak XL ProLube Kit for for 5,200-lb to 6,000-lb Axles
- Video: Review of the Kodiak XL ProLube Oil Bath Hub Body and Cap
- Video: Kodiak XL ProLube Oil Bath Hub Body and Cap: The Breakdown
- Shop: Kodiak XL ProLube Kit for 3500-lb Axles
- Shop: Kodiak XL ProLube Oil Bath Hub Body and Cap - 1.98"
- Shop: Replacement Oil Cap Kit for 9,000-lb and 10,000-lb Dexter Axle
- Q&A: Replacement Hub for 1997 Ranger Boat Trailer
- Q&A: How to Determine the Correct Replacement Hubs for a Boat Trailer
- Article: Most Popular Wheel Bearings
- Q&A: Trailer Hub Replacement for Axletek BD-65535
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Q&A: Does Maxxis ST235/80R16 Radial Tire w/ 16" Eagle Aluminum Wheel Come With Lug Nuts
- Q&A: Brake Assemblies for 2002 Cedar Creek
- Article: How to Measure a Trailer Axle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements
on Trailer Hubs and Drums
