Does Redline Trailer Bearing Grease Seal # 29031 Include a Spring
Published 04/17/2014 >
Products Featured in This Question
Question:
does this seal have the inner spring in it as mine does. cant tell by picture. thanks.1950 parkhurst trailer 5200 lbs axle 3inch o/d x 1.86 inch axle seal o/d on axle x .50inch thick 1/2inch 6 bolt hub
asked by: Dave
Expert Reply:
The Redline Trailer Bearing Grease Seal # 29031 that you referenced does not include a spring. This single-lip seal is for use in the inside end of a trailer hub (the side closest to the axle and furthest from the spindle).
I think the part with a spring that you are referring to is a special type of outer grease cap (not an inner grease seal) called a Bearing Buddy. These mount on the outside end of the trailer hub/spindle in place of a standard closed grease cap. They hold a supply of grease that is forced into the hub when needed by the spring pressure.
Bearing Buddies can be selected by precisely measuring the hub bore with a digital caliper, then matching the Bearing Buddy by its matching outer diameter. The link provided will take you to our main page for all sizes; you can select a set based on your measured hub bore. For example, part # BB1810 fits a hub bore of 1.810 inches. The linked article on bearings may be helpful.
Product Page this Question was Asked From
Grease Seal - Single Lip - I.D. 1.875" / O.D. 3.00" for Older 5.2K Axles - Qty 1
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Single Lip
- 1.88 Inch I.D.
- 3.00 Inch O.D.
- 5200 lbs Axle
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Possible Replacement for Trostel 300-156-6 Seal
- Q&A: Replacement Seal For National Grease Seal # 5970
- Q&A: Looking For Replacement Grease Seal For Older Utility Trailer
- Q&A: Replacement 1779 and 2788 Bearings and National 5970 Seal
- Q&A: Finding a Hub for a Very Old Trailer with 6 Lug Bolt Pattern # 1779 inner and # 2788 Outer Bearings
- Q&A: Old Trailer has 2 Different Sized Spindles and Obsolete Bearing and Seal Numbers
- Q&A: Availability of Grease Seal Ring for Seal on 22834 Trailer Hub
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation: Starting from Scratch
- Article: Double-Eye Trailer Suspension System Review
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Article: How to Tell the Weight Rating of a Trailer Axle


