Bumper and Pintle Hitch Connection For a 2003 Chevrolet 6500 Series Chassis

Question

Question:

I need a bumper and pintle hitch with the spring on it for a Chevy 6500 2023 what’s combo do you recommend

asked by: Patrick P

0

Expert Reply:

Currently we do not have a custom fit setup for your 2023 Chevrolet 6500 but you may be able to create a custom setup. You can use the Fabrication Kit # 3371809042 along with the ICC Bumper # 3371809025 to create your own plate. The fabrication kit includes a 5/8" thick mounting plate which is 34-1/2" wide by 15-1/2" tall.

Then you will need to drill a hole in the mounting plate for a spring type Pintle Hook # 337BP100A. Otherwise we have a standard bolt on Pintle # 33710040

expert reply by: Bud M

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

While we don't have any custom fit hitch plates that fit your 2016 International 4300 we do have some universal mounts that would potentially work. You'd need to have a qualified welder install the kit. The hitch plates below all come with…

view full answer...

Answer 3

The Buyers Products #3371809042 measures 9-1/2" on the vertical side with the remaining height being 6" down to the bottom. The #3371809043 measures 14-1/2" on the vertical side with 8" of remaining height down to the bottom of…

view full answer...

Answer 4

The Buyers Products Flatbed/Flatbed Dump Hitch Plate Bumper with 2" Receiver #3371809055 is designed or flatbeds and flatbed dump trucks. While it is ready to mount on Ford trucks, there is some drilling required for GM trucks. This hitch is a…

view full answer...

Answer 5

Hey Mounir, we only have universal style trailer wiring options for your 2023 Lincoln Nautilus like the Curt #C59236. Do you have a hitch already or were you looking for a recommendation for that as well?

view full answer...

Answer 6

The hole spacing of the Buyers Products Fabricators Hitch Plate #3371809042 that you referenced is the same as the standard pintle mount bolt pattern which is 1-3/4 inches apart vertically and 3-1/2 inches apart horizontally.

view full answer...

Answer 7

The Buyers Products 45 Ton Pintle Hook #337PH45 does not have the 4 inch square bolt pattern but rather uses a different pattern. Vertically the holes are 3 inches on center. Horizontally the top row is 5-1/4 inches on center and the bottom is 6-1/2…

view full answer...

Answer 8

The width of the tab you marked in your picture is 2.9" and the height is 6.32". I have attached the full dimensional drawing of the #3371809065 below for your reference.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey Vicky! Yes, the Meyer HomePlow Residential Hydraulic Snowplow #ME53FR includes the wired pistol grip controller. See the attached picture. You can use the plow on your 2003 Silverado as long as you have a front hitch with a 2" receiver.

view full answer...

Bumper and Pintle Hitch Connection For a 2003 Chevrolet 6500 Series Chassis

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching