Parts Needed To Install Redarc Tow-Pro Elite On A 2024 Subaru Ascent

Published 12/29/2023

Products Featured in This Question

Redarc Tow-Pro Elite Brake Controller - Dash Knob - Off-Road Mode - Up to 3 Axles - Proportional

(1676)

$290.00

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(3400)

$41.72

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3397)

$121.25

Question:

Hello. I want to put the Redarc Elite brake controller on my 2024 Subaru Ascent. Can you tell me what parts I will need? There is no trailer wiring of any kind currently. I will need to get the controller from you guys too. Can you sent a paarts list? Thanks

asked by: Richard

Expert Reply:

We can get you set up! Since there is no trailer wiring currently on your 2024 Subaru Ascent, there are two wiring kits you will need. The first is the Curt T-Connector # C56040. The second is the Universal Installation Kit # ETBC7. These two kits combined will have everything you need to wire the vehicle with both of the standard trailer connectors 4-flat and a 7way. It will also include all of the necessary wires for the brake controller.

For the controller we have part # RED44FR. This includes the Tow-Pro Elite controller and the universal wiring harness, which will be required for installation.

I have linked a few install videos below which you may find useful if you plan to do all of this yourself.

expert reply by: Jesse M