Recommended WDS and Adapter for a 2019 Forest River Ice Cave 17MP

Updated 12/15/2023 | Published 12/14/2023

Products Featured in This Question

Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems - 14,000 lbs GTW, 1,400 lbs TW

(76)

$147.27

Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW

(896)

$850.00

Question:

I have a 2019 Forest River Ice Cave 17MP RV camper/fishhouse that Id like to determine if you have a WDH and straight tongue adaptor for. See photo. Dry Trailer Wt: 4500 lbs Dry Tongue Wt: 775 lbs 17 trailer wt = heavy/out of proportion to 10 rule Straight Tongue: 3 Tubes stacked vertically - Bottom 2 Tubes: 4inch x 4 - Top Tube: 3inch x 3 - 3 Tube Assembly Max Overall: 4inch W x 11.5inch H for L-Bracket Assy Distance from coupler centerline to surge brake switch interference = 29inch

asked by: Jerry G

Expert Reply:

You could try and use the Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems # EQ95-01-5950 which would get bolted to your tongue after the coupler. It doesn't look like a whole lot of room, but since that gap sits 29" from the hitch ball and you have at least one inch of space this'll work.

To find the right WDS for your system you are going to want to load your trailer up as if you were setting off, and get the fully loaded tongue weight. You mention its 775 lbs dry, so I'd imagine being in the neighborhood of 800 when it's loaded.

If that's the case the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control # EQ37100ET would work great. this WDS has a max weight capacity of 10,000 lbs and a max tongue weight capacity range of 600 to 1,000 lbs putting your potential tongue weight right around the middle which is ideal.

expert reply by: Bryce D