Sway Bar that Fits 1996 Dodge Ram 2500 2WD

Question

Question:

Which sway bar # fits 1996 ram 2500 2wd Cummins

asked by: Ronnie

0

Expert Reply:

The Hellwig rear sway bar part # HE88MR is a fit for your 1996 Dodge Ram 2500 2WD and would work great to improve handling and stability.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 3

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 4

Hey Kyle! The Pacbrake Alpha HD Air Bag Suspension Kit #PB22RV installs in the same location as most fifth wheel and gooseneck brackets. I would expect to have to do some drilling to install these with your B&W Turnoverball. Instead, I recommend…

view full answer...

Answer 5

Hey Bruce! The outside dimensions of the Double Rocker Switch #37212015 including the faceplate are 2.86" wide x 2.437" high. It is also available in black #37212235 and brown #37212145. What are you using the switch for?

view full answer...

Answer 6

Hey Dave. The T5079 RV Designer Entrance Door Lock item #RD68SR is made of a die-cast zinc alloy for the housing and handles. The strike plate, plunger load pins and plunger end plates are made of steel. The parts are then black powder coated and…

view full answer...

Answer 7

Hello Bob, thanks for reaching out. We do have a lock that will work with the etrailer Adjustable 2-Ball Mount #e66PR. For that I recommend the following: - etrailer Hitch Receiver Lock for 2" and 2-1/2" Hitches - Flush - 3-5/8" Span -…

view full answer...

Answer 8

Hi Todd, I know exactly the feeling you’re describing, and you’re definitely not alone. That floaty, pushy feeling at highway speeds, especially when trucks pass, is really common on the Sprinter 3500 chassis with a taller coach like your Tiburon,…

view full answer...

Answer 9

Hey Steve, welcome back! The difference between these two Hellwig Adjustable Big Wig Rear Anti-Sway Bars is the fitment. The #HE94FR is designed for 4WD models and the #HE97MR is designed for 2WD models. Since your 2019 F-250 is 4WD you need the…

view full answer...

Answer 10

Hey Adam, welcome back! Since your 1997 Ram 3500 has the B&W Turnoverball item #BWGNRK1394 installed, you'll need the Pacbrake Alpha HD Air Bag Suspension Kit item #PB82FV. This set of air bags has a 5,000 lbs support capacity, which is the…

view full answer...

Answer 11

Hey Gary, thanks for reaching out. I see you already got the Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE96XR but I wanted to make sure your question was answered. Yes, the Hellwig Big Wig Rear Anti-Sway Bar #HE96XR fits the 2026 GMC Sierra 3500…

view full answer...

Answer 12

Hey Rich, yes you can definitely use the PowerMax Wireless 50A RV Power Center and Distribution Panel #PM77VR in your cargo trailer setup. You'd run the AC input to this and you'd have DC power circuits for anything that's DC powered in…

view full answer...

Sway Bar that Fits 1996 Dodge Ram 2500 2WD

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching