Is The Fulton 2 Drop Aluminum Ball Mount Made In The USA?

Question

Question:

I’d like to know if made in the USA?

asked by: Andy Z

0

Expert Reply:

For a made in the USA aluminum ball mount we only have adjustable units like the Flash Secure 2-Ball Mount # DTALBM6400 which includes hitch balls as well. The Fulton # F97CR you found as well as the similar Curt # C74WR and Brophy # EA20 aluminum ball mounts are all made overseas.

If you do not want an adjustable mount we do have the Convert-A-Ball Ball Mount # AMSC2HD which is made in the USA. While not being an aluminum ball mount it does have the benefit of a built in cushion to help reduce shock transferred to your vehicle.

expert reply by: Bud M

0

Answer 1

Yes, it will Mark. The InfiniteRule Hitch Lock for 2" Toyota Tacoma Hitches item #IR75FR has a longer span to accommodate the Toyota hitch receiver. Which they've recently started expanding to other vehicles besides the Tacoma. You will most…

view full answer...

Answer 2

Typically people use a large crescent wrench to hold the wrench flats on the ball of the #C45036 but if you wanted a dedicated wrench you'd want a wrench in the size of 1-1/2 inch. You'd want to tighten the nut of the hitch ball to 250 ft…

view full answer...

Answer 3

Hello Hal, Great question! It really would be nice if Toyota kept their receiver the same size as everyone else’s so any standard 2" lock would fit. The good news is that Infinite Rule actually made a lock specifically for the 2024+ Toyota…

view full answer...

Answer 4

Because I don't know how your specific trailer is designed with the scissor lift I don't know if the Dutton-Lainson Hand Winch w/ Automatic Brake - TUFFPLATE Finish - 2,500 lbs #DL15721 will be large enough capacity to safely lift your 2,800…

view full answer...

Answer 5

I recommend getting the OEM pucks if you will be towing regularly. We have a few options for the hitch ball and chain loops that are most likely more cost efficient than the dealer. The OEM ball and loops are made by Curt who has a little competition…

view full answer...

Answer 6

I recommend the 30,000 lb B&W Ball and Safety Chain Kit for Ford, GM, and Nissan Titan Underbed Gooseneck Trailer Hitch part #BWGNXA2061 which fits down into the OEM prep package on your Chevy. The B&W ball comes with an integrated easy…

view full answer...

Answer 7

Hi Allen; the weight of the Curt Adjustable 2-Ball Mount - 2" Hitch #C99NR is 36.59 lbs and the Curt Adjustable 2-Ball Mount - 2-1/2" Hitch #C79NR is 38.61 lbs. Assuming you have a 2-1/2" hitch you would need a reducer sleeve like the…

view full answer...

Answer 8

Good afternoon Liz, there sure is! I highly recommend checking out the etrailer Ball Mount w/ Pre-Torqued #e99DR; it is rated at 10k lbs and has a drop of 2" which sounds perfect for your application. The ball is pre-torqued for you and the ball…

view full answer...

Answer 9

Great question Luke! These are all great options, but let me point out a few differences for you. The etrailer Adjustable 2-Ball Mount #e66PR is a good quality, affordable option compared to similar options like the BulletProof Hitches 2-Ball Mount…

view full answer...

Is The Fulton 2 Drop Aluminum Ball Mount Made In The USA?

Products Featured in This Question

Continue Researching