Removing Cover of Fulton XLT Winch for Access to Mounting Hardware

Question

Question:

How is the cover removed for a Fulton XLT Winch F142425. I just received the unit and dont want to ruin the cover before I get it mounted.

asked by: Earl M

0

Expert Reply:

The top cover of the Fulton XLT part # F142425 just pulls right off to give you access to the mounting holes that you'd run the install hardware through.

expert reply by: Jameson C

0

Answer 1

We do have a replacement handbrake for the Fulton High-Performance 2-Speed Trailer Winch #F142430. You need the Replacement 2-Speed Handbrake for Fulton Trailer Winch #F501210

view full answer...

Answer 2

Hey Rich! The Fulton High-Performance 2-Speed Trailer Winch #F142430 can only be used with a cable. The Curt #C45ZJ can be used with a cable or a strap. The Fulton also includes a handbrake. Outside of that they are pretty similar in terms of…

view full answer...

Answer 3

The size winch that you will need depends on a couple of different factors. I have included part of our hand winch FAQ below regarding boat winches and have linked the FAQ article for you to view. Finding the Right Capacity Winch for your Boat…

view full answer...

Answer 4

I attached links to this page that have all of the dimensions for the Fulton F2 Trailer Winch #FW32000101 that you referenced. When looking at it from the front the winch will have an overall width of 14.77", which includes the extension from…

view full answer...

Answer 5

I would easily recommend the Fulton F2 Fully Enclosed Trailer Winch with Adjustable Handle - 2,000 lbs #FW20000301 or the Fulton XLT 2-Speed Trailer Winch with Heavy Duty 20' Strap - Zinc - 2,600 lbs #F142418 as a replacement for your…

view full answer...

Answer 6

For your 2007 Crest pontoon boat, I recommend using the Fulton XLT 2-Speed Trailer Winch #F142425. This is a top-of-the-line boat trailer winch, it has 2-speed gearing for faster retrieval, and a corrosion-resistant zinc finish and polypropylene…

view full answer...

Answer 7

We definitely have a boat winch that is capable of winching your 5,000 lb boat. I recommend the 3,200 lbs Fulton XLT, 2-Speed Trailer Winch part #F142425 which will be more than enough to winch the 5,000 boat trailer as long as you have good rollers…

view full answer...

Answer 8

There are two schools of thought when it comes to determining the correct sized winch for a boat. The first being that the winch should be able to handle 3/4th of the total combined weight of the boat along with the motor, fuel and gear. The second…

view full answer...

Removing Cover of Fulton XLT Winch for Access to Mounting Hardware

Product Page this Question was Asked From

Continue Researching