Recommended Base Plate for a 2007 Jeep Wrangler

Published 10/29/2023

Products Featured in This Question

Roadmaster StowMaster Tow Bar - Coupler Style for 2" Ball - Car Mount - 6,000 lbs

(152)

$960.00

Roadmaster Crossbar-Style Base Plate Kit - Removable Arms

(2162)

$444.92

Roadmaster Crossbar-Style Base Plate Kit - Removable Arms

(2162)

$670.00

Roadmaster Universal Hy-Power Diode Wiring Kit

(309)

$119.95

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord

(3361)

$186.40

Roadmaster Battery Disconnect for Towed Vehicle w/ Flat Tow Brake System - Gas Only

(401)

$227.26

Roadmaster Bent Electrical Socket Bracket

(179)

$27.49

RoadMaster 6-Wire Trailer Connector - Vehicle End

(371)

$26.16

Question:

I have a 2007 Jeep Wrangler and a Roadmaster Stowmaster Tow system. What base plate / connection do I need for my jeep? Please advise Thank you

asked by: James T

Expert Reply:

The Roadmaster StowMaster Tow Bar item # RM-501 uses a crossbar style base plate. The correct one for your 2007 Jeep Wrangler is the Roadmaster item # 1429-1 if you have the standard factory bumper or item # 1430-1 if you have the Mopar or Warn bumper.

I have linked an installation video below for the first one to help you get it set up. I have also attached both sets of instructions.

Some other parts you will need to flat tow your 2007 Jeep Wrangler are listed here:

Battery Disconnect - Roadmaster Battery Disconnect with Switch item # RM-766

Wiring Harness - Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 or since it sounds like you might already have the cable you will just need the following parts to connect to your Jeep's lights and control them:

Roadmaster Universal Hy-Power Diode Wiring Kit item # RM-152

RoadMaster 6-Wire Trailer Connector - item # RM-910030-7

Roadmaster Bent Electrical Socket Bracket item # RM-910030-5

Supplemental Braking System - Brake Buddy Select 3 Portable Supplemental Braking System item # HM39524