Prep Work for Installing Alpha Systems Butyl Tape for RV Weatherproofing

Question

Question:

Is there any surface prepwork prior to installing this?

asked by: Kim

0

Expert Reply:

The only prep work for using the Alpha Systems Butyl Tape for RV Weatherproofing # AL62FJ is to clean and dry the surface area prior to applying the tape. Technically it can be applied without cleaning but the seal won't be as good if you don't clean the area and then dry it or wait for it to dry.

expert reply by: Jon G

0

Answer 1

Hello James, I am very sorry to hear that your trailer was damaged by the hurricane, I hope there is not too much other damage that needs repairing. Glad you are OK and able to write in. For sealing the new metal panel to your cargo trailer’s roof,…

view full answer...

Answer 2

The Andersen Rapid Jack #AM3620 and the Andersen Camper Wheel Chock and Leveler #AM3604 are pretty similar with the main difference being that part #AM3604 will provide between 1/2" to 4" of height but part #AM3620 will provide 6-7/8"…

view full answer...

Answer 3

Hey Lester. The 2016 Grand Design Reflection 337RLS uses a Schwintek system. The motor should be located at the top of the vertical column on either side of the slide-out, which is accessible from the outside. You'll need to pull back the rubber…

view full answer...

Answer 4

Hey, Kenny! The gasket included in the Steel Rubber RV air conditioner rubber gasket kit, part #SR73MR, is 1" tall and 1-1/2" wide. It’s designed to fit the standard 14" x 14" AC opening. Below, you’ll see a picture showing all of…

view full answer...

Answer 5

Hey, Chris. After doing some research and checking with Lippert, It looks like the only replacement part they have for the Venture Actuator and High Speed Slide-Out Motor, part #LC168956 is the motor itself, part #LC295380. In my searching It looks…

view full answer...

Answer 6

Thanks for the pictures and measurements Tim! The Terran Industries 5-Leaf Double Eye Spring item #TX93RJ are going to be the best option to replace your 26.5" long springs. This spring has a 3,500 lbs capacity so it's going to be a solid…

view full answer...

Answer 7

Hey Matt! I spoke with my contact at Lippert and they're needing some photos of the motor, including any and all data tags on the motor itself. They aren't able to find anything with the part number 080300994 that you sent me. You can send…

view full answer...

Answer 8

I recommend using the Alpha Systems Butyl Tape for RV Weatherproofing #AL62FJ to install the Solera Electric RV Awning Conversion Kit w/ Speakers #LC351396. This tape measures 30' x 1-1/2" x 1/8" so you'll be able to have plenty of…

view full answer...

Answer 9

Hey, Jeff! The 20ft awning kit part #LC405523 that you are looking at does not come with the lights. I did have to do some searching to make sure so I apologize the page wasn't as clear as it should be. I'll go ahead and list all the parts…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Hey Lars, welcome back! I can indeed confirm that the Furrion Variable Speed Chill Cube air conditioner with a heat pump is indeed really happening. They are currently available for order (02/04/26) and will be shipped out towards the middle of next…

view full answer...

Prep Work for Installing Alpha Systems Butyl Tape for RV Weatherproofing

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching