Replacement Black Screen Door Sliding Panel For 2015 Winnebago Class A RV Motorhome

Question

Question:

Looking for a sliding panel for door handle area of an RV screen door for a 2015 Winnebago Class A motorhome. Thanks

asked by: Michael J

0

Expert Reply:

You will need to measure your screen door on your 2015 Winnebago class A motorhome to ensure you select the correct replacement slider from the list below.

Screen Door Slider # 37211175 (12" wide x 12" tall)
Replacement Slide for P-Series RV Screen Doors # A77020 (11-7/8" wide x 11-11/16" tall)
Replacement Slide for Elixir RV Screen Doors # A77016 (10-3/4" wide x 12-1/8" tall)

If you have a different measurement for the slats between your screen door please let me know along with the manufacturer for your screen door.

expert reply by: Bud M

0

Avery

7/16/2024

My parents 1986 holiday rambler presidential 26 has a 12 1/8" X 12" brown slider on the screen door and we have yet to find a match. Not sure the of the company that makes the door but those are the measurements

Bud M.

7/17/2024

@Avery I do not see we have a replacement option for your parents 1986 Holiday Rambler. While the 12"x12" # 37211175 may still be able to be used in your door you might need to find used part from an RV junkyard.

Answer 1

Yes, the Screen Door Slider - 12" - Black #37211175 measures about 12" x 12" square so it will work perfectly for your door.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 8

Hi Bill! You will need to completely replace the system since you have old Dometic R410a units on your Monaco. Everything switched to R32 refrigerant following new EPA regulations in 2025, and the new systems are not backwards compatible. For a…

view full answer...

Replacement Black Screen Door Sliding Panel For 2015 Winnebago Class A RV Motorhome

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching