Recommended Weight Distribution Hitch For Towing a inTech Sol Horizon Rover with 2023 Honda Pilot

Question

Question:

Do you know if the factory hitch on the 2023 Honda Pilot Trailsport is compatible with the Andessen WDS hitch? We would be using it with an itech Sol Horizon Rover Pq. **Please tell me if there is any problem or which one is better for this Pilot 2023 and the Sol Horrison RV I dont know the reasons, but I have heard that some problems are not supported by weight distribution systems. Thank you

asked by: Jorge H

0

Expert Reply:

Your 2023 Honda Pilot is capable of using a weight distribution hitch. For your inTech Sol Horizon Rover you will need to contact the manufacturer with your VIN information to ensure the frame is safe to use with a weight distribution hitch. This is due to the frame being constructed of aluminum and varying in construction from year to year.

As for the Andersen weight distribution I know they have several great reviews but every time I have dealt with them they always had sway issues which could not be resolved. I recommend using the Equal-i-zer Weight Distribution System # EQ37060ET as they are one of the best bang for the buck weight distribution hitches available. They have been around for years and manufacturers of other brands still try to compare themselves to Equal-i-zer since they have earned the reputation for being the best. You will need the 1-7/8" 12pt Thin Walled Socket # ALL643216 to install the 2-5/16" Hitch Ball # EQ91-00-6100 to match your trailer coupler.

expert reply by: Bud M

0

Answer 1

You will want to consult with your trailer's manufacturer for their guidelines on using a weight distribution hitch since you do have an all aluminum frame on your 2021 Intech Sol Horizon Rover. It looks like your Sol Horizon Rover has a GVWR of…

view full answer...

Answer 2

Hey Albert, so the Blue Ox Swaypro part #BXW0550 that you referenced is a solid option as long as the loaded tongue weight of your Intech Sol Horizon camper is between 350 and 550 lbs. Keep in mind any cargo weight behind the rear axle of your…

view full answer...

Answer 3

There is a weight distribution hitch option for your new 2021 Intech Flyer Discover with a completely covered A-frame. Instead of using a standard weight distribution hitch which has brackets that go around the frame you will need to use a weight…

view full answer...

Answer 4

I do recommend you use a weight distribution system on the Intech Explore Travel Trailer while towing with your 2018 Toyota Highlander. The reason for this is because the weight of the trailer will be over half the weight of the vehicle which is the…

view full answer...

Answer 5

From what I could find, it looks like the plug for a trailer brake controller on your 2023 Nissan Frontier is located in the same location as the 2022 model year. That is behind the side panel by the OBD connector and is likely pushed back into the…

view full answer...

Answer 6

Some weight distribution system prohibit reversing because doing so could damage the system. If you are backing up in a straight line though it would be fine. But to make turns while backing up you would need to disengage the spring bars and/or the…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Recommended Weight Distribution Hitch For Towing a inTech Sol Horizon Rover with 2023 Honda Pilot

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching