Which Would Provide More Cushioning a Curt Rockerball or a Convert a Ball Cushioned Ball Mount

Question

Question:

Which would be more effective in reducing the jarring when towing a 2500 lb trailer, the Curt Rocker Ball or the Convert-A-Ball?

asked by: Matt H

0

Expert Reply:

The Curt Rockerballs # C94CR will make a bigger improvement in ride quality over a Convert a Ball ball Mount like the part # AMSC8.

The Rockerball allows quite a bit more movement than the ball mount which is why it does a better job.

expert reply by: Jameson C

0

Answer 1

I have the info you are looking for, but the Hidden Hitch and the Draw Tite hitches are basically the same thing as they are both made by the same company. Curt is different as it is a completely different company. The Curt is going to have the edge…

view full answer...

Answer 2

Hey Larry that's quite a bit of rise! They don't make those for 1-1/4" hitches but I can get you closeish. You'll want to start with the Curt Class I Drawbar item #C45024. It has a 5" rise from the top of the inside of the hitch…

view full answer...

Answer 3

Hey Greg, this is a really good question and one that had me scratching my head for a second but for all intents and purposes the part #C40047 and the #CU46FR are the exact same. The packaging is only actual difference but the ball itself is the…

view full answer...

Answer 4

You are correct the Curt RockerBall Shock Absorbing 2" Hitch Ball - 1" Diameter Shank - Chrome - 7.5K part #C40047 does have a rise. On a standard hitch ball it sits flush with the ball mount but the RockerBall has the included height of…

view full answer...

Answer 5

The Convert-A-Ball Interchangeable Trailer Ball Kits are perfectly safe up to their 10K capacity, just as safe as a standard one-piece trailer ball, so you'll have no worries there. This is without a doubt the type of interchangeable ball I'd…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Which Would Provide More Cushioning a Curt Rockerball or a Convert a Ball Cushioned Ball Mount

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching