Front Hitch that Fits 2020 Toyota 4Runner

Question

Question:

I am looking to put a 2” front hitch on my 2016 Toyota 4Runner TRD Pro. I see from your website that you show a guarantee fit for a 2020 4Runner TRD Pro with your Curt C31076 hitch. But when I change the vehicle type to my 4Runner for 2016 it only shows guarantee fits for the SR5 and Trail versions of the 2016 4Runner. Will the Curt C31076 fit my SUV without modifying my 1/4” aluminum skid plate or do you have a better option for a front hitch for my vehicle? Thank you for your time.

asked by: Chuck

0

Expert Reply:

For your 2016 Toyota 4Runner TRD Pro you can install the Curt front hitch part # C31054 but you will need to permanently remove the skid plate to complete the install. There is no other option that would work.

expert reply by: Jameson C

0

Answer 1

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 2

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 3

Hi Ethan; I'm sorry to say the Locking Endcaps for Vortex Aero Crossbars #RRVA-LEC4 do not fit the Sportz bars. Rhino-Rack does not have an option for locks that fit these crossbars at this time.

view full answer...

Answer 4

Hey Rick, I wish I could say yes a Thule locking hitch pin would work with your Rhino Rack T-Load part #RTL002 but they are different sizes. The good news is the T-Load comes with a lock for the hitch pin so you won't need anything else.

view full answer...

Answer 5

That's not a silly question Vanessa. The answer's no but I've heard way worse questions. The Progressive Dynamics Replacement Section item #PD4645V is the updated version and the only option to replace the converter in a Parallax Series…

view full answer...

Answer 6

The Rhino-Rack T-Load Hitch Mounted Load Assist and Support Bar #RTL002 does use the Hitch Lock #RRRBCA025.

view full answer...

Answer 7

Yes the 4,000-lb leaf spring is compatible with a 3,500-lb axle. There are a couple of important measurements. Spacing from eye to eye on the spring when unloaded with no weight on the axle. Inner eye diameter of the spring roll Spring width from…

view full answer...

Answer 8

Hello Justin, Looks like you were right on the money. I am showing with that information that it is a 3,500 pound axle so you will need the Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle #BK2-100. Getting things…

view full answer...

Answer 9

As you can see in the diagram I provided, the tilt is adjustable up to about 45°. The tilt mechanism has a pin that can be used in two different positions to allow a roughly 15 or 30° degree tilt or the pin can be completely removed for the…

view full answer...

Front Hitch that Fits 2020 Toyota 4Runner

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching