Internal Tire Sensor Monitor Recommendation for Wheat Planter

Question

Question:

I’m looking looking for internal tire monitoring system for my wheat planter. There are 8 tires and the back row of tires are 70ft from the cab.

asked by: Riley

0

Expert Reply:

You would want the TST TPMS - Color Display # TST-507-INT-6-C which comes with 6 sensors and then for the other two sensors you'd want the # TST-507-INT-S1. This is an internal sensor kit like you are wanting that has a great range.

expert reply by: Jameson C

0

Answer 1

Hey Matt, The Deluxe Compartment Door Key Lock #37200185 comes with a random code so there's the possibility that you could one cut to the 391 key code, but no absolute certainty that you will. If you're only wanting to replace just a single…

view full answer...

Answer 2

The valve stems that come with the Tuson Towable Tire Pressure Monitoring System - 6 Sensors #335TPMS6WIVS are a little longer than what the standard valve stem length is so you could potentially run into a problem fitting an air hose over it with a…

view full answer...

Answer 3

Of the two TPMS kits you mentioned only the part #TST-507-INT-6-C is compatible with the Schrader EZ sensors since those replace the valves and this kit uses sensors that attach around the barrel of the wheel. The sensors do not require pairing to…

view full answer...

Answer 4

I think you'll be better off using all internal tire sensors instead of mixing and matching on your 2023 Winnebago View. TST manufactures the highest quality sensors, so that's who I recommend going with, and for six sensors use the TST TPMS…

view full answer...

Answer 5

The TST TPMS #TST-507-INT-6-C is designed to clamp around the wheel before you mount the tires. You won't need to vent any air pressure unless you overloaded the tire's max psi rating. With this style of sensor you wouldn't need worry…

view full answer...

Answer 6

Yes the TST TPMS - Color Display - Signal Booster - 6 Internal Tire Sensors #TST-507-INT-6-C would work great on your E-450 dually that has a total of 6 wheels.

view full answer...

Answer 7

According to TST, once the repeater is installed, the sensors included with the #TST-507-INT-6-C will work within 5 minutes. My representative tells me that the expected battery life is 3-5 years, and once the battery goes dead, the sensor itself…

view full answer...

Answer 8

For a system with 6 internal monitors and a color display monitor, use part #TST-507-INT-6-C. Ordering the parts you mentioned separately wouldn't get you all the necessary parts, as the repeater would be missing.

view full answer...

Answer 9

According to my contact at TST, going with the internal sensor would have the following benefits: • Battery Life. The internal sensors can be expected to last 5+ years, versus about 1 to 1-1/2 years for the external. • Protection: By virtue of the…

view full answer...

Answer 10

That is an interesting question, so I reached out to the manufacturer, TST, who said yes, you can use the flow-through sensors with the internal sensors. The reason why is that each sensor - the internal and flow-through - has a unique 6 digit code…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Internal Tire Sensor Monitor Recommendation for Wheat Planter

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching