Adapter Hose Needed For A Winchester Model-Trailblazer PS-5000 Camp Stove

Updated 08/07/2023 | Published 08/06/2023

Products Featured in This Question

Propane Adapter Fitting - 1/4" Female Inverted Flare x 1/4" Male NPT

(286)

$6.79

MB Sturgis Propane Adapter Hose - Type 1 x Disposable Cylinder Port - 6'

(1033)

$28.27

Question:

Hello, I have a Winchester Model-Trailblazer PS-5000 Camp stove. It was supplied with an adapter/regulator shown that screwed into the stove, and then to a small 1lb. disposable LP tanks. I am looking to be able to use a 20 lb. tank with the stove, but am unable to determine the brass fitting connectors size that is on the right side front of the stove as my pictures show. Do you have any information on what fitting was used on these units, or have a hose that would connect to the stove, and then to a 20lb. barbecue style tank? I have a couple hoses that fit 20lb tanks, but the end that goes to the stove does not fit. I have spent a lot of time on line, but to no avail. This would be much appreciated. Thank you,

asked by: Karl F

Expert Reply:

The fitting you have on your stove looks like it's a proprietary type fitting and I wouldn't be able to confirm exactly what it is, but it looks like it's threaded onto the supply line and could be removed and replaced with another fitting type that matches the thread pitch. The regulator has a female 1" - 20 fitting so you could also just use an adapter hose like the MB Sturgis Propane Adapter Hose # 100555-72-MBS to connect to a larger propane tank.

expert reply by: Kevin C