Replacement Ventline RV Roof Vent Bug Screen

Question

Question:

I need a replacement screen and frame for my travel trailer. The old screen and frame is a ventline. I don’t know the model number. Didn’t see one on the frame. The dimensions are 13.5” by 13.5” by 1.25” thick. The hole for the turn knob is approximately 3.25” from the outside edge of the frame. Wondered if you have something that will work. Thanks,

asked by: Matt

1

Helpful Expert Reply:

Thank you for the picture of your current Ventline bug screen. With seeing that the correct replacement would be the part # BVC0573-31.

expert reply by: Jameson C

1

Bug Screen RV Roof Vent
(click to enlarge)

Answer 1

I attached a picture that a coworker of mine took that shows the dimension you are looking for on the part #BVC0573-31. Looks to be right at 2-3/4 inches.

view full answer...

Answer 2

The Replacement Screen for Ventline Ventadome Trailer Roof Vents part #BVD0434-31 is used on the following Ventline models; V2092, V2110, V2094 and V2119. If you have the V2092, V2110, or V2119 then you'll need the Replacement Screen Frame with…

view full answer...

Answer 3

Do you know what brand of bathroom vent you have? I attached a link to a page that has all of the vent screens we carry in the meantime for you to check out. You might be able to scroll through them and see if you see the match you need.

view full answer...

Answer 4

Based on the number you listed the cover you are looking for is #BVD0449-A01 for a white cover or #BVD0449-A03 for a tinted smoke cover. The replacement screen frames come in Polar White #BVC0573-41 or Birch White #BVC0573-31.

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Hey Matt! The Hellwig Load Pro 35 Heavy Duty Helper Springs #HE93XR are only designed to give you additional support while towing/hauling. Aftermarket suspension enhancement cannot increase the capacity of your 2024 Silverado 2500. The only way to…

view full answer...

Answer 9

The direct replacement for your Ventline screen with model number VD0434 is #BVD0434-31 (birch white) or #BVD0434-41 (polar white). This is compatible with Ventline Ventadome roof vent models V2092, V2110, V2094 and V2119. However, if you're…

view full answer...

Answer 10

Hey Jonathan. If you're wanting to have an airbag set up alone with a 5th wheel hitch, you will want to get a FIrestone kit. The Airlift kit you asked about, part #AL88341, will not be able to be installed along side a 5th wheel, or gooseneck, as…

view full answer...

Answer 11

Hey Randy! I can definitely set you up with air bags and a compressor. I recommend Firestone since they make the most durable and reliable air bags. For a complete kit with an air compressor you can choose from the following: -Firestone Ride-Rite Air…

view full answer...

Replacement Ventline RV Roof Vent Bug Screen

Product Page this Question was Asked From

Continue Researching