Why are The Roadmaster Smart Diodes Required For a 2022 Jeep Wrangler 4xe?  

I recommend The Roadmaster Universal Wiring Kit with Smart Diodes #RO44FR for flat towing your 2023 Ford F-150. The smart diodes in the kit will ensure that your variable voltage, LED tail lights will function as they should while your truck's…

The correct replacement for your Klauber K01431B300 slide-out motor is the Replacement Motor Assembly for Lippert RV Slide-Outs - Klauber A-300 Model #LC157511.

You will want to check for power going into your Wall Controller #FR48NR by removing it from the wall and testing the wires with a Circuit Tester #PTW2992 that shows you battery voltage or by using a Multimeter #PT89ZR. Both wires will be blue and…

Hey Grand, thanks for all of the info on your 2020 Jeep Wrangler Willys. Based on having the variable voltage LED the correct Roadmaster Diode kit would be the part #RO44FR which works with LED lights.

Yes, it will! The Blue Ox Tow Bar Adapter Brackets item #e98986 will allow you to connect your Blue Ox Aventa II BX7335 tow bar to the etrailer Invisible Base Plate Kit item #e98949 that is confirmed to fit a 2010 Jeep Wrangler. No, you will not need…

Hi Dave, The etrailer Invisible Base Plate Kit #e98948 and Blue Ox Base Plate Kit #BLU53FR are designed slightly different, but both are compatible fits for your 2023 Jeep Gladiator. The #e98948 is going to be an easier installation since you…

According to Roadmaster, the 1.8V reading is in the acceptable range on your #RO54FR. The smart diode has built in resistors which take the voltage down low like that. It gets especially low for the LED version since it takes very little to power an…

For your 2021 Jeep Wrangler Sahara Unlimited you can use either the etrailer Base Plate #e98948 or the Demco #DM9519336 as long as you have the factory plastic bumper and you will be able to use reuse your existing Blue Ox Aventa II without needing…

For your 2021 Jeep Wrangler Sport the etrailer Invisible Base Plate Kit - Removable Arms Item #e98948 are a great choice. They will require one simple adapter Item #e98986 to attach to a Blue Ox Tow Bar. For your vehicle I recommend the Blue Ox…

Variable voltage tail lights use the same wire for the brake signal and running lights instead of the standard turn/brake wire setup. To determine if you have variable voltage tail lights you'll need to pull the tail light out to get to the…

While it is possible to cut the 4-pole connector off of the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles #HM56302 and wire it into a 6-pole socket, you would be doing yourself an IMMENSE disservice using any kind of plug-in tow bar wiring…

Yes, the standard diodes like the Roadmaster Hy-Power Diode #RM-790 will work with constant voltage LED lights. The Roadmaster Smart Diodes for Variable Voltage LED Tail Lights #RO54FR you were looking at are designed for use on variable voltage LED…