Lights Do Not Work With One Vehicle Only, a 2015 Chevy Traverse
Updated 07/24/2023 | Published 07/21/2023 >
Products Featured in This Question
Question:
I added LED lights to my pop-up camper. The indecent lights worked previous to me doing the light upgrade. Not sure if it makes a difference but my husband grease the bearings and the pop-up has electric brakes. The trailer will work on our 08 Denali but we need it to work on the more dependable vehicle the traverse. It’s a 2015 Chevy traverse that we added the tow bar and plugged the wires into the add-on port behind the back passenger tire. Everything is getting power to the back. I did buy the curt 57003 LED seven way adapter. And the lights still will not work. Thoughts or ideas? We have checked the fuses!
asked by: Korrie H
Expert Reply:
Thank you for your purchase directly from etrailer of the 7-Way Trailer Adapter for Towing Trailers with LED Lights # C57003. If this did not fix your issue on your '15 Traverse, and the trailer works find on your other vehicle, we know the issue is on the Traverse.
Sine you already checked the fuses, the next thing to do is use a circuit tester to test the connector on your vehicle after disconnecting it from your trailer. Check the wiring going into your connector from your tail lights to see if those wires are carrying the correct signals, and if they are not, you know it's the wiring in the Traverse and you'll likely have to take it to the dealer/a mechanic to get fixed.
If the signals going to your connector are okay, check your trailer connectors for corrosion, which can be green or white in color. A build-up of corrosion can interfere with the signals getting through the connectors so if it is present you can replace the connector with the Curt T-Connector Vehicle Wiring Harness # C55774.
I have added a link below to a help article on trailer wiring for you to take a look at which may also be of use. Additionally, to help prevent any type of corrosion in your connector, and increase its durability and lifespan I highly recommend using Dielectric Grease for Electrical Connectors # 11755.
Product Page this Question was Asked From
7-Way Trailer Adapter for Towing Trailers with LED Lights
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- No Converter
- No Tow Package
- 7 Blade
- Plug and Lead
- Plug-In
- CURT
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Why Does My GMC Sierra Show Check Trailer Lamp Warning with LED Lights on My 5th Wheel?
- Q&A: Will the 7-Way Trailer Adapter for Trailers with LED Lights Fix the No Trailer Connected Warning?
- Q&A: Difference Between Tow Ready # 20142 and Curt # C57003 Adapters with Lamp-Out Sensors
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Q&A: Troubleshooting LED Trailer Lights Not Working Consistently With My Chevy
- Q&A: Adapter to Allow LED Trailer Wiring to Connect to 2019 Ford F-150
- Q&A: Will 7-Way Trailer Adapter C57003 Solve Power Pulse Issue On 2022 GMC Sierra 1500?
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: 4 Reasons Not to Use RV Solar Power (And 4 Reasons You Should)
- Article: Best Vehicles to Flat Tow Behind an RV


