Can 5th Airborne Cushioned Pin Box Fit In Place of Reese Revolution Pin Box

Question

Question:

Will this air ride pin box fit a Reese revolution pin box wing set?

asked by: Derrick S

0

Expert Reply:

The Reese Revolution pin box is an OEM version of the Sidewinder which is designed to fit in place of standard pin boxes. So most likely the cushioned 5th Airborne you would need is the part # RP78FR which fits in place of the most popular pin box design of the Lippert 1621, 0719, Fabex 600, and Lippert Rhino.

The # 5AB-S500-700 fits the less popular Lippert 116, 0115, and Fabex 520, 530, 560.

expert reply by: Jameson C

0

Answer 1

We would definitely be able to upgrade to a higher capacity Leaf Spring or Silent Ride set up. That being said, we do not carry torsion axles, so we do not have a bolt on upgrade available. The axle #8327820-EB would upgrade you to 5,200 pounds per…

view full answer...

Answer 2

The Timbren Silent Ride Suspension part #TSR10KT02 is sold as a pair or in other words it will replace the suspension on a tandem axle trailer. It comes with both sides needed for this. The axle will attach via the two u-bolts on each side.

view full answer...

Answer 3

Let me start by saying that the Timbren Axle-Less Suspension System #A35RS545E you purchased is not for triple axle trailers. I would just suggest making your trailer a tandem axle and going with either the Timbren Silent Ride Suspension for Tandem…

view full answer...

Answer 4

The center of the axles will sit 6-1/2" below the frame when mounted on the Timbren Silent Ride Suspension for Tandem Axle Trailers item #TSR7000T04. Depending on the leaf spring set up, legnth of hangers and axle mounting point above or below…

view full answer...

Answer 5

I reached out to my contact at Timbren and on the Timbren Silent Ride Suspension for Tandem Axle Trailers w/ 3" Round Axles - 10,000 lbs #TSR10KT02, the 6-1/2" measurement from the center of your 3" axle to the bottom of the frame is…

view full answer...

Answer 6

If you go overkill with your suspension weight rating you'll end up with a harsher ride quality as the springs will be basically too stiff to move enough to cushion the ride quality. Since the most your trailer is going to weigh is 9,000 lbs your…

view full answer...

Answer 7

Based on the information I could find on your 2023 Jayco Jayfeather 30QB travel trailer it appears you are going to have 4,400lb axles. You are going to need to verify the diameter of your current axles as some manufacturers like Lippert use a…

view full answer...

Answer 8

The first thing to consider is if the axle(s) are actually bent. Trailer axles have a bow in them so they are higher at the center than at the ends. When under load the axles straighten out some. That is part of how they get their capacities. If the…

view full answer...

Answer 9

We carry the Timbren Axle-Less System rated at 5,200 lbs part #ASR5200S01. The axle-less system mounts to your trailer frame and takes the place of your old axle and springs.#ASR5200S01 is a straight spindle design. Timbren also offers these axles…

view full answer...

Answer 10

The thickness of the tube is not any different as they are both 3 inch diameter, and the spindles are also the same utilizing the same inner diameter bearings, hubs, and seals. The difference in capacity is in the custom bend in the axle that creates…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Can 5th Airborne Cushioned Pin Box Fit In Place of Reese Revolution Pin Box

Continue Researching