Troubleshooting a Curt Venturer Trailer Brake Controller in a 2020 Ford F-150 with Tow Package

Updated 07/10/2023 | Published 07/07/2023

Products Featured in This Question

Curt Venturer NEXT Trailer Brake Controller - Up to 3 Axles - Time Delayed

(92)

$80.70

Power Wire Kit for Electric Trailer Brake Controllers - 12 Gauge

(11)

$21.65

Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In

(87)

$12.81

Question:

i have watched a lot of your videos on trailer brake controller installation but have not seen anything on a problem i have installing one on a 2020 f150 3.5 ecoboost with tow pkg. i have a curt C74VV and the 51436 connector plugged into the truck connector. i am getting poer to controlle and when connected to trailer using the slide bar i aam getting bars displayed. But when i depress brake pedal i get nothing. i have replaced all fuses associated with the controller in truck. i hace taken a test light and penetrated the red and blue wire and get the same results. can you help with a solution

asked by: Tommy B

Expert Reply:

I took a look at the Curt Venturer NEXT Trailer Brake Controller # C74VV and Curt Custom Wiring Adapter for Trailer Brake Controllers # C51436 that you have. It is a little odd that you have power and it works with the manual over-ride but not with the brake pedal.

My first instinct was that your brake controller port didn't have power, that is somethin that can be a problem on that model and is fixed with the Power Wire Kit # BRK-ELECKIT, but if you have power that isn't it.

Looking at the owners manual, it could be a tripped circuit breaker, no battery connection B+ or ground. It sounds like you have already been troubleshooting those issues. I would be checking the wiring behind the port in your truck, it is possible the port is not working correctly.

Have you tested the brake controller while moving? As in, have you driven the truck while hooked up and have used the manual over-ride to activate the brakes? I'm just curious if you are actually getting brake power, or if the lights on the controller are just activating with teh manual over-ride.

expert reply by: Scott S