Availability of Trailer Axle with Close to 60 inch Spring Seat to Spring Seat Dimension
Updated 07/05/2023 | Published 07/03/2023
Question:
Hello - im looking for a axle, with a spring center length of about 60 give or take an inch or two. Hub face length is not a critical measurement. Do you carry anything with that dimension? thanks again,
asked by: Clay V
0
Expert Reply:
We have 2,000 lb axles like the etrailer part # e32GR that have a spring seat measurement that is similar to what you are looking for. This has that dimension at 58 inches and has a hub face to hub face dimension of 72 inches.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- 58 Inch Spring Center
- 72 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Q&A: Replacement 2,000 Pound Axle With 5 on 4-1/2 Bolt Pattern For Bear Trailer
- Q&A: Can Trailer Spindle be Bent Back In Place
- Q&A: Recommended 2,000 lbs Axle w/ Idle Hubs That Have a 5 on 4-1/2 Bolt
- Q&A: Switching From ST185/80R13 Tires to ST205/75R14 Tires on Sun Tracker Boat Trailer
- Q&A: Powering 3rd Brake Light and Dome Light on Topper for 2025 Silverado 1500
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: How to Choose Replacement Axle for Lowe's 5x8 Trailer
- Q&A: How Are Brake Flanges Measured?
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Determine Tire/Wheel Diameter
- Article: How to Measure for Trailer Hitch Drop
- Article: Rust Prevention