Replacement Shroud Recommendation for a Dometic Duo-Therm 459516.701

Question

Question:

needing a shroud for Duo therm mdl 459516.701. thank you

asked by: David

0

Expert Reply:

For your Dometic Duo-Therm 459516.701 you can use the Replacement RV Air Conditioner Cover for Dometic Duo-Therm # DMC69FR for a replacement.

expert reply by: Bryce D

0

Annie F.

3/25/2025

We have a Domestic air Conditioner shroud model number 459516.701 need one that's compatible. Thanks

Bryce D.

3/26/2025

@AnnieF Hey Annie, you can use the Replacement RV Air Conditioner Cover for Dometic Duo-Therm # DMC69FR.

Answer 1

According to my research your Dometic 459516.701 AC unit is the Dometic Brisk Air II model 59516 which means the Adco RV Air Conditioner Cover #290-3021 is what you're needing. This measures 34" long x 29-1/2" wide x 14-3/4" tall…

view full answer...

Answer 2

Since you have a Dometic Duo Therm RV AC unit the correct replacement shroud would be the part #DMC98FR for white or part #DMC69FR for offwhite.

view full answer...

Answer 3

Yes we do have a unit that will replace your Dometic duo therm air conditioner. Now we do not carry the Dometic brand AC, but we do have the Furrion #FR42PV. This comes with a conversion kit that makes it compatible with your existing Dometic setup.…

view full answer...

Answer 4

The photo of the AC nameplate didn't come through but that's okay, as based on the model number I was able to verify with Dometic the correct replacement shroud for your Dometic 457915 AC, which is the following: - Replacement Shroud…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Replacement Shroud Recommendation for a Dometic Duo-Therm 459516.701

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching