What's Needed To Add Reverse Light Function To Curt Adapter 57676 On 2021 Kia Telluride?

Updated 06/20/2023 | Published 06/19/2023

Products Featured in This Question

Adapter 4 Way to 7-Blade RV Connector w/Test Lamps

(11)

$38.42

16 Gauge Primary Wire - Black - Per Foot

(64)

$1.10

Hook Probe Circuit Tester

(70)

$13.94

Self-Stripping Connector with Waterproof Sealant - 14-18 Gauge - White and Blue - Qty 1

(46)

$2.22

Question:

I’m looking for help with the following set-up 2021 Telluride CU94FR Curt T Connector 4 pole flat trailer connector Curt 57676 4 way flat to 7 blade RV Vehicle side Boatmate trailer 6011-22 harness extension 5 to 7 way trailer side Issue: I currently have no provision in this setup for surge brake reverse solenoid activation. I note the blue wire on the 57676 connector. Do I simply use this wire and tap into the telluride reverse light circuit to make this work? Thanks

asked by: Bruce D

Helpful Expert Reply:

You've got it.

You'll need to run some # 16-1-1 from the blue wire on the Curt 4-way to 7-way adapter # C96KR (57676) to the reverse light circuit on your 2021 Kia Telluride.

A circuit tester like # PTW2993 will help you to find the correct wire to splice into with a quick splice # SWC501746-1.

expert reply by: Samuel C