Could Torklift Camper Tie Down from 2021 Ford Fit 2017 Chevy Silverado 3500

Question

Question:

I am purchasing a camper with Tork lift hold downs on a 2021 ford s350 super duty. Can I make it work on my 2017 Silverado 3500?. Thx.

asked by: Bruce J

1

Helpful Expert Reply:

Torklift camper tie down fits are very specific so there wouldn't be a way to use the tie downs from the Ford truck on your 2017 Chevy Silverado 3500. So you would want to follow the link I attached on this page and select the options of your Silverado from the drop down menu to see what would fit.

expert reply by: Jameson C

1

Answer 1

I checked with Torklift and for your 2005 Ford F-250 short bed, with steps, and a factory hitch the correct custom camper tie downs are part number #TLF4007 for the front and #TLF3004 for the rear. If your looking for turnbuckles we have the…

view full answer...

Answer 2

Hello Mike, Sounds like you are getting things set up the right way and not going over your payload, I respect that. It looks like the weights are the same whether you have a 6 3/4' or 8' bed. If you happen to have an aftermarket hitch,…

view full answer...

Answer 3

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Hello Jeff, Sounds like you’ve got a big camper (about 4,000 lbs) on your 2024 F-350 dually, and when it’s loaded, the truck feels bouncy and sways a bit. That’s pretty common with heavy campers, especially if the suspension is still stock.…

view full answer...

Answer 6

There isn't a way to install zerk fittings on your spindle to make it an EZ lube spindle, but we do have Bearing Buddies which are designed for spindles like yours that do not have the zerk fittings to make installing grease in them easier. You…

view full answer...

Answer 7

Hey, Daniel! All depends on how long your truck bed is and some other details about your truck. The kit you were looking at, part #TL22SV, is for a 6-3/4 foot bed that's equipped with a factory hitch that has an open-ended crosstube and is…

view full answer...

Answer 8

Hello Ken, thanks for reaching out. Sounds like you are on the right track here because the type of running boards on your truck do dictate which tie downs to use. You are also correct that you will not be able to use the tie downs from your old 2002…

view full answer...

Answer 9

It sure is Joe, and welcome back! The Roadmaster Rear Anti-Sway Bar item #RM46GR is definitely compatible with the TorkLift SuperHitch item #TLD1108 installed on your 2014 Ram 3500. This sway bar is meant to replace and upgrade your factory one. Do…

view full answer...

Answer 10

Hi Quintin! We do have bed mats that are confirmed to fit your 2025 Ford F150 with the 5.7 foot bed, but the Black Armour ones have not been yet. They will likely have one in the near future, I just can't say when that will be. That said, if you…

view full answer...

Answer 11

It sure will Jeremy. The DeeZee Custom-Fit Truck Bed Mat item #DZ28GJ will fit the 8' bed on a 2024 Ram 3500 dually. What kind of cargo do you haul in the bed of your truck?

view full answer...

Answer 12

Yes, it is! You're going to need to cut out more than just the holes though when installing the DeeZee Custom-Fit Truck Bed Mat item #DZ28GJ. The mat is 3/8" thick so you'll have to cut out more of an H pattern or your 5th wheel hitch…

view full answer...