Do All Mounting Holes Need Used on the Demco Hydraulic Brake Actuator DM72VR
Updated 06/01/2023 | Published 05/30/2023
Question:
Do I need to use all three mounting holes on the DM72VR? My current actuator only has two mounting holes that are the same size and location as the two upper mounting holes on the DM72VR.
asked by: Chad
0
Expert Reply:
Yes, you'll need to use all of the mounting holes on the Demco Hydraulic Brake Actuator part # DM72VR in order to be covered under warranty or retain the capacity rating. Unfortunately, if one of the holes does not line up with an existing this mean drilling a new one.
expert reply by:
Conner L
0
Product Page this Question was Asked From
Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Boat Trailer
- Construction Trailer
- Farm Trailer
- Travel Trailer
- Utility Trailer
- Bolt-On
- 7000 lbs GTW
- 2 Inch Ball Coupler
- 3 Inch Channel Tongue
- Drum Brakes
- No Lockout
- Demco
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: 40716~15
- Shop: Demco Hydraulic Trailer Brakes - Free Backing - Galvanized - Left/Right - 10" - 3.5K
- Video: Feature Breakdown: Demco Hydraulic Brake Kit
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Q&A: Recommended Replacement Brake Actuating Surge Coupler for Atwood 85778
- Q&A: Mounting Bolt Hole Dimensions for Demco Hydraulic Trailer Brake Actuator # DM72VR
- Q&A: Can the Replacement Atwood Master Cylinder 85736 Still Be Obtained
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Preferred Method For Bolting On A Demco Hydraulic Brake Actuator DM72VR
- Q&A: How To Bleed Brakes With Demco Hydraulic Brake Actuator
- Q&A: Mounting Bolt Hole Dimensions for Demco Hydraulic Trailer Brake Actuator # DM72VR
- Search Results: sw1000
- Search Results: brkh10a
- Search Results: bearing grease
- Search Results: marine grease
- Search Results: bk2 100 bearing kit
- Search Results: bk2~100
- Video: DeeMaxx Hydraulic Brake Line Feature Review
- Video: What to Know About the Demco Hydraulic Brake Actuator-DM72VR
- Video: The Low-Down on the Dexter DX7.5L A-60XL Brake Actuator w Electric Lockout
- Video: All About the Demco Hydraulic Brake Actuator-DM72VR
- Shop: Mystik JT-6 High Performance Synthetic Grease - 1 Lb Can
- Shop: Washer For 1" Spindle
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: 7-Piece Installation Set for Bearings, Races, and Seals
- Shop: Demco Hydraulic Brake Actuator w/ Electric Lockout - Disc - Zinc - 2" Ball - 7,000 lbs
- Shop: Dexter DX7.5 Drop-N-Go Brake Actuator - Drum Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Video: Feature Review Dexter Steel Brake Line Tubing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Shop: Trailer Hitch