Replacement Threaded Hitch Pin And Clip For A Swagman XTC2 TILT Bike Rack

Question

Question:

I have misplaced the threaded hitch pin and a clip for my Swagman XTC2 TILT Bike Rack for 2 Bikes - 1-1/4 and 2 Hitches - Frame Mount Item # S64671 Can you let me know if you can replace it? Thank you

asked by: Scott

1

Helpful Expert Reply:

You can replace the threaded pin and clip for your Swagman XTC2 TILT Bike Rack for 2 Bikes # S64671 with part # P5902 or you can upgrade to the Locking Anti-Rattle, Threaded Hitch Pin for Swagman Hitch Racks # S64029 to ensure that no one can take of with your bike rack.

expert reply by: Kevin C

1

Answer 1

I do see where you got the Swagman XTC2 Bike Rack #S64670 and Threaded Hitch Pin #P5902 from us in the past. That pin is designed to fit most 2" receivers as well but there are some vehicles where the hitch is slightly larger and it will not…

view full answer...

Answer 2

You can use clip part #AM3427 for your Swagman XTC-2 bike rack #S64670. This is a general-purpose part that fits multiple applications.

view full answer...

Answer 3

Yes, you are on the mark with the correct hitch and cable lock for the Swagman XTC-2 TILT 2-Bike Rack #S64671. - Anti-Rattle Hitch Lock and Cable #S64031 This is exactly what you need to lock the XTC-2 TILT to your Subaru Forester as well as lock…

view full answer...

Answer 4

When choosing the correct trailer hitch to install on your 2023 Nissan Murano there are currently two choices to choose from but are very similar. There is The etrailer Trailer Hitch Receiver #e98907 and then there is The Curt Trailer Hitch Receiver…

view full answer...

Answer 5

The Curt Trailer Hitch Receiver part #C13205 is an excellent option for a 2016 Nissan Murano and it will work well with the Curt 2 Bike Platform Rack part #C18085. The Curt 2 Bike Platform Rack weighs 46 lbs so a bit on the heavy side but still…

view full answer...

Answer 6

Yes, the etrailer.com hitch part #E98907 is the same design as the Curt hitch part #C13205 available for the 2019 Nissan Murano except the etrailer.com hitch is matte black and the Curt is glossy. I have attached photos of the Curt hitch on a 2018…

view full answer...

Answer 7

To lock the Swagman XTC2 TILT Bike Rack #S64671 to your etrailer Trailer Hitch Receiver #e98843 you need the Locking Anti-Rattle, Threaded Hitch Pin #S64029 you referenced, but I actually recommend picking up the Anti-Rattle Hitch Lock and Cable…

view full answer...

Answer 8

Which bike rack do you have specifically? Some bike racks have very specific hitch pins that need to be used with them so I'd need to first know what you have to pick out your best solution.

view full answer...

Answer 9

I do have a solution for you. The Replacement Threaded Hitch Pin and Clip for 1-1/4" Shanks on Swagman Bike Carriers, part #P5902, is the replacement bolt you need. The Locking Anti-Rattle, Threaded Hitch Pin for Swagman Hitch Racks, part…

view full answer...

Answer 10

It sounds like you have already tightened everything down for the Swagman XTC-2 2-Bike Rack, Item #S64670, so you should not have much play from your bike rack. Because you are still having a lot of movement, I would check and see if the pin hole on…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Replacement Threaded Hitch Pin And Clip For A Swagman XTC2 TILT Bike Rack

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching