Recommended 7-Way Connector and Brake Controller for a 2020 BMW X3
Published 04/30/2023
Products Featured in This Question
Question:
Hi, I have a 2020 BMW X3 M40i. I installed the T-one wiring harness and have the Draw-tite class III trailer hitch. If I wanted to tow a RV trailer, what is the product I would need to add to my car for electric braking capabilities? Thanks,
asked by: Michael
Expert Reply:
Since your 2020 BMW X3 M40i already has a 4-way connector, you will need the Universal Installation Kit for Trailer Brake Controller item # ETBC7. The kit includes a pre-wired 7- and 4-way trailer connector that mounts easily at the rear of your BMW with an included bracket. This kit is designed for use on a vehicle with an existing 4-way flat trailer connector and plugs directly into it.
You will then connect the blue wire to the blue wire on the brake controller, connect the black wire to the positive post on the X3's battery, the white wire to ground, and the yellow wire to vehicle's reverse circuit if applicable. This will provide you with the ability to control your trailer's brakes and also provide you with a 12v power wire for you trailer's accessory lights.
For a brake controller, I recommend the Redarc Tow-Pro Liberty Brake Controller item # RED24FR. The Liberty is a proportional brake controller that activates your trailer's brakes when your BMW decelerates. It also has a unique installation method where the main portion of the brake controller is installed behind your dash and the only visible portion is the control knob.
You will also need the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item # RED69FR to complete your installation.
There are no custom fit options for a 7-way connector or a brake controller adapter.
Product Page this Question was Asked From
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Comparing the Universal Installation Kit # ETBC7 and the 7-Way RV Upgrade Kit # ETBC7L
- Q&A: What is the Difference Between the Tekonsha Prodigy P2 and the P3 Brake Controllers
- Q&A: What Hitch Will Fit My 2012 GMC Savana 3500 4.8L V8 Built on a Cutaway Chassis?
- Q&A: Hitch, Weight Distribution and Brake Controller Recommendations for a 2017 Toyota Sienna XLE