Can Timbren Springs, SuperSprings & Blue Ox Weight Distribution All Work Together 2018 Ford F-150?

Question

Question:

if you add to a 2018 ford f150, leaf spring + timbren suspension + blue ox weight distribution what happen.

asked by: Eddie L

0

Expert Reply:

You are able to install the Timbren Rear Suspension Enhancement System # TFR1504E along with the SuperSprings # SSA28 while also using a Blue Ox TrackPro Weight Distribution # BLU55FR on your 2018 Ford F-150. The weight distribution is going to help the most with leveling your F-150 when connected to a trailer. The SuperSprings being a more active suspension than the Timbren will begin to engage sooner when weight is applied and will provide a more stable ride. The Timbren's with these other systems is most likely only to become engaged when hitting bumps or pot holes and will reduce the amount the suspension compresses. Do note that even with all the extra suspension enhancement this will not increase your towing capability or payload.

expert reply by: Bud M

0

Answer 1

Hello Donny, thanks for reaching out. We do offer Timbrens for the 2015 Chevy Silverado 2500, for that I recommend part #TGMRCK25D. These likely will affect the adjustment of your weight distribution system. You will want to install the Timbrens…

view full answer...

Answer 2

Hey Pat, I've got some first-hand experience with this myself recently so I understand the ride quality issues. Timbren SES jounce springs work independently from a weight distribution hitch so you can definitely remove them and reuse your…

view full answer...

Answer 3

For an anti-sway bar that is a confirmed fit for your 2015 Ford F-150 I recommend taking a look at the Roadmaster Rear Anti-Sway Bar #RM-1139-177. The bar attaches to your rear axle and chassis, enhancing stability by diminishing the roll that can be…

view full answer...

Answer 4

The Timbren Rear Suspension Enhancement System part #TFR1504E is a good option for a 2020 Ford F-150 but the suspension has to reach a threshold before they engage and they do compress when this is done so you will still sag a bit while they are…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Can Timbren Springs, SuperSprings & Blue Ox Weight Distribution All Work Together 2018 Ford F-150?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching