Wiring Adapter 4 Pole to 7 Pole Vehicle End Trailer Connector for Curt Echo Brake Controller

Updated 04/24/2023 | Published 04/22/2023

Products Featured in This Question

Curt Echo Wireless Brake Controller - 7-Way Plug-in w/ Bluetooth App - Up to 2 Axles - Proportional

(1913)

$289.95

7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires

(393)

$91.91

Question:

I got your 4 to 7 pin adapter, p/n #30717 And have a 2023 Toyota Highlander Hybrid LE and need to convert the 4 pin plug dealer installed plug to a 7 pin. For a Curt Echo wireless brake controller. On your 4 to 7n pin adapter, besides the plug, do I only need to connect the Black to Positive battery and the White to grd? I know I dont need the Blue wire, BUT the yellow wire, do I need it???

asked by: Frank P

Expert Reply:

In regards to the Adapter 4 Pole to 7 Pole Vehicle End Trailer Connector part # 30717; the white wire goes to ground, the yellow wire gets tapped up, the black wire goes to the battery, and the blue wire goes into the cab to a trailer brake controller. If you're using a wireless trailer brake controller like the Curt Echo Wireless Brake Controller part # C51180 then the blue wire won't get used.

Instead of the Adapter 4 Pole to 7 Pole Vehicle End Trailer Connector, I recommend the 4 to 7-Way with 4-Way part # ETBC7L as it comes with multiple trailer connectors, a mounting bracket as well as everything else you need for a wireless trailer brake controller like circuit breakers.

expert reply by: Conner L