Where Are Bearings and Seals that Come with Dexter Trailer Hub and Drum Assembly 8 on 6.5" Made
Updated 04/24/2023 | Published 04/22/2023
Question:
I see it states hub and drum made in USA but how about bearings and seals
asked by: Melvin D
0
Expert Reply:
In regards to the Dexter Trailer Hub and Drum Assembly part # 8-219-9UC3-A, the hub/drum is made domestically and the bearings and seals are made internationally. We don't offer any domestically made bearings and seals unfortunately.
expert reply by:
Conner L
0
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - Oil Bath
- Trailer Hubs and Drums
- Hub with Drum
- Oil Bath
- 25580 / 14125A
- Standard Grade
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Can You Use 8,000 lb Leaf Springs On A 7,000 lb Axle?
- Q&A: Hub Recommendation to Convert Dexter 7k Axle to Oil Bath
- Q&A: What's Difference Between Trailer Hubs # 8-219-9UC3 and # 8-219-9UC3A
- Q&A: How To Raise the Axle on a Escape 17B Camper?
- Q&A: Replacement 14v4w Light Bulb for a 2008 Forest River Berkshire Motorhome
- Q&A: What are Cut Out Dimensions for Vitrifrigo DP2600IXD4-F-3 Refrigerator # VT96FR
- Q&A: Trailer Hub and Drum with 8 on 6-1/2 Bolt Pattern and 9/16 Studs for 7,000 Pound Axles
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Holiday 2025 | Staff Picks for Real-Life Adventures
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: No Missteps Here: Best Camper and RV Steps (2022)
- Article: Trailer Maintenance Schedule