Replacement Gear Box and Motor for 2007 Gulfstream BTCruiser RV Step

Question

Question:

Good morning, I have a 2007, Gulfstream , BTCruiser. The motor and gearbox on the Kwikee electrical steps need to be replaced. The PN for the steps is 902609000. Can you please tell me what part is needed to replace? Thank you.

asked by: Tony G

1

Helpful Expert Reply:

Thanks for the picture of your current gearbox and motor assembly. Based on seeing that you have the linkage "C" so you will need both parts Replacement Gear Box and C Linkage for Kwikee Electric RV Steps - 2006-Present # LC379162, and Replacement Motor with Mounting Plate for Kwikee Electric RV Steps # LC379608.

expert reply by: Kate F

1

RV Gear Box and Motor
(click to enlarge)

Answer 1

If you just need the gearbox, the linkage will have an A, B, or C. Once you know which one you have, then you will need one of the following: Lippert Components Kwikee Step Gear/Linkage with A #LC379160 Lippert Components Kwikee Step Gear/Linkage…

view full answer...

Answer 2

Powered RV steps that still operate but that make bad mechanical noises may not need a new motor, but you're right that it is likely you'll need a new gearbox and/or linkage. There are two possible kits for your step unit. Part #LC379161 is…

view full answer...

Answer 3

The Lippert Components Kwikee Step Gear/Linkage with A (1101425) #LC379160, the Lippert Components Kwikee Step Gear/Linkage with B (1101426) #LC379161, or the Lippert Components Kwikee Step Gear/Linkage with C (FOR 26 SERIES STEPS 1101427) #LC379162…

view full answer...

Answer 4

We do have replacements for your Kwikee series 24/25 steps. The Replacement Motor with Gear and Table for Kwikee 24 and 25 Series #LC369529 will replace most of the pieces, but you will need to add the Replacement Link Assembly for Kwikee 24 and 25…

view full answer...

Answer 5

It doesn't look like the pictures came through, however, if you have the step series 22, 23, 27, 28A, 30, 32, 33, 34, 35, 36, 38, and 40, with the "A" linkage, you can use the Replacement Gear Box and A Linkage for Kwikee Electric RV…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Replacement Gear Box and Motor for 2007 Gulfstream BTCruiser RV Step

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching