Picking Out the Correct Replacement Landing Gear Gears and Leg for a 2015 Jayco Motorhome

Updated 04/10/2023 | Published 04/07/2023

Question:

I have a 2015 Jayco. The rear leveling jack gears are ware. It will grind and not extend down when leveling. Are there replacement the leveling leg also. Thanks

asked by: Phil S

Expert Reply:

We absolutely carry replacement gears like the Lippert Venture Follow Leg Repair Kit for 5th Wheel RV Landing Gear # LC146060 which will work with Lippert Components powered landing gears, which is the most common landing gear used however you'll want to make sure first.

This kit includes one follow drive shaft, two drive shaft bushings, one E-clip, one drive pin, one spiral pin, one 12T bevel gear, one 16T bevel gear, and one shim washer.

Also for a replacement leveling leg, you're going to want to match the leg directly to avoid any potential issues. To do this, you're going to need to either locate a manufacturer/part number or take a couple of quick measurements and then make your selection based on those measurements.

You'll just need to measure your current landing gear leg from the outside of the weld stop to the outside of the other weld stop, as well as the inside to inside.

I've attached a picture of these areas for you to measure as well.

expert reply by: Bryce D